Product
Product
Supplier
Search
Get Quote
730 people are quoting
The hydraulic nut consists of a nut body, a pressure ring, an oil filling port and an oil discharge and exhaust joint. Clean the appearance of the nut when using it. Screw the nut into the workpiece and lock the nut, the pressure ring should be in the original position, then insert the oil filling hose interface of the hand pump into the oil filling port, lock the unloading switch handle on the right side of the hand pump, slowly pressurize, and drain the oil at the same time The air release cap on the upper part of the exhaust joint is turned inward, and the air is released until the air in the nut is exhausted, HMV Hydraulic Nuts price and clean hydraulic oil flows out. Press out to achieve the purpose of pressing, until the pressure reaches your desired pressing purpose. Loosen the unload switch handle and release the pressurized hose connector of the hand pump.HMV Hydraulic Nuts
|
Features of Hydraulic Nuts
|
|
|
|
1
|
Commonly used in bearings, flywheels, propellers and other workpiece presses hydraulic tools.
|
|
|
2
|
With the resulting top thrust is smooth, no impact, the process does not hurt the workpiece and other characteristics.
|
|
|
3
|
Through the hydraulic nut inner thread, which can be installed in the shaft parts, the piston under the action of 700bar hydraulic pressure to push the workpiece to the installation position.
|
|
If you are interested in the product, contact 2bvideo.com for more information for more information
The information of 2bvideo.com limited shown above is provided by the user or collected on the network. Video 2B does not guarantee the authenticity,accuracy and legitimacy of 2bvideo.com limited information. Video 2B does not involve legal relationships and disputes between users arising from transactions other than secured transactions on this website. Disputes shall be settled by you through negotiation. If you are the person in charge or relevant employee of this enterprise, if you find that the enterprise information is incorrect or want to manage thiscompany, please contact us jacklee1558@gmail.com, after you claim the enterprise, you can obtain management permission, publish supplyand demand information, bring consulting orders, and remove page advertisements.
Main Product:
Hydraulic Jack,
Hydraulic Wrench,
Hydraulic Pump,
Bearing Heater,
Hydraulic Puller,
Hydraulic Hole Punching Tool
