Product
Product
Supplier
Search
Get Quote
730 people are quoting
4.1. Main indicators
4.1.1 Process flow: After rust removal is completed → ultrasonic cleaning → electrolytic phosphate → saponification → drying;
4.1.2 Inlet diameter of wire rod: φ9-12m or max φ36；
4.1.3 Maximum processing speed: 65 meters per minute (SH1D - Φ 12), or 40 meters per minute (SH1D - Φ 36)
4.1.4 Each equipment is equipped with a stabilizing device;
4.1.5 Steel wire travel elevation:
4.1.6 Wire travel mode: linear;
4.1.7 Total installed capacity: 35KW;
4.1.8 Total length: about 19 meters;
4.1.9 Equipment layout: Each process of the liquid tank is equipped with a working tank and a liquid storage tank, with liquid overflow circulation, electrolytic phosphate tank and ultrasonic, and saponification tank each equipped with a liquid storage tank;
4.1.10 Electrolytic phosphate: operates at room temperature without the need for heating;
4.1.11 Saponification tank: automatic temperature control. Heating method: electric heating; Temperature requirement: above 75 ℃. Saponification solution only supplements soap powder and water, with zero discharge;
4.1.12 The process temperature inside the drying tube is 60-120 ℃;
4.1.13 After the whole machine is put into operation, it must be ensured that the product quality meets the current relevant national standards; 1.14 The whole machine must be put into operation to ensure synchronization with the original wire drawing machine;
4.2 Equipment configuration
4.2.1. Ultrasonic cleaning
4.2.1.1 Ultrasonic cleaning machine: 1.8*0.7*1m；
4.2.1.2 Single ultrasonic signal generator, power 2KW/220v/60 frequency, one vertical pump 0.37KW/380v;
4.2.1.3 Material of storage tank body: 304 stainless steel;
4.2.1.4 Ultrasonic transducers are installed at the optimal distance structure, with high utilization rate; 2. Electrolytic phosphate
4.2.2.1 Phosphate device: 6.8 * 0.7 * 1m;
4.2.2.2 One high-frequency pulse power supply;
4.22.3 A set of anode plates, with titanium alloy as the base material and 7 layers of rare earth alloy coated on the surface;
4.2.2.4 Two 0.37KW/380v vertical pumps (phosphate pumps), the liquid is not heated, and the liquid in the upper and lower tanks is circulated by the liquid pump without slag or irritating gas;
4.2.2.5 Phosphate tank material: PPR,Thickness 20mm;
2.6 No slag is generated during operation, no filtration is required;
2.7 Suitable for dynamic wires;
2.8 Material of storage tank: 304, 3mm stainless steel plate;
2.9 Rack: 304 stainless steel reinforced structure;
2.10 Storage tank size: 5 * 0.7 * 0.6m;
2.11 Long shutdown time, no special treatment required for liquid, stable and non crystalline liquid.
We can make wire drawing machine,drum packing machine,layer winding machine,butt welding machine,pointing machine,and so on.
If you are interested in the product, contact 2bvideo.com for more information for more information
The information of 2bvideo.com limited shown above is provided by the user or collected on the network. Video 2B does not guarantee the authenticity,accuracy and legitimacy of 2bvideo.com limited information. Video 2B does not involve legal relationships and disputes between users arising from transactions other than secured transactions on this website. Disputes shall be settled by you through negotiation. If you are the person in charge or relevant employee of this enterprise, if you find that the enterprise information is incorrect or want to manage thiscompany, please contact us jacklee1558@gmail.com, after you claim the enterprise, you can obtain management permission, publish supplyand demand information, bring consulting orders, and remove page advertisements.
Main Product:
Wire Drawing Machine ,
Flux Cored Wire Forming Machine ,
Layer Winding Machine ,
Mig Welding Wire Production Machine ,
pay off and take up machinery,
drum packing machine
