Product
Product
Supplier
Search
Get Quote
730 people are quoting
HONY®Nylon Bush Sleeve Nylon products have good toughness, strong abrasion resistance, oil resistance, shock resistance, tensile, bending strength, and have low water absorption,Inch stable,Good performance and other characteristics, so it is used to process various wear-resistant high-strength parts. This product has a wide range of uses, replacing steel, iron, copper and other gold with plastic,PA gears is a good material that is an important engineering plastic; cast nylon widely replaces wear-resistant parts of mechanical equipment, and replaces copper and alloys for equipment the wear-resistant parts. It is suitable for the production of wear-resistant parts, transmission structural parts, household appliances parts, automobile manufacturing parts, and screw preventive machines,mechanical parts, chemical machinery parts, chemical equipment. Such as turbines, gears, bearings, impellers, cranks, instrument panels, drive shafts, valves , blades, screw rods, high-pressure washers, screws, nuts, sealing rings, shuttles, sleeves, bushing connectors, etc.
The main characteristics of nylon products: mechanical strength, stiffness, hardness, high toughness, good aging resistance, good mechanical damping ability, good
Sliding performance, excellent wear resistance, good machining performance, when used for precise and effective control, no creeping phenomenon, good wear resistance,Inch stability is good.
The scope of use of nylon products: widely used in chemical machinery, anti-corrosion equipment, gears and parts of bad materials. Wear-resistant parts, transmission structural parts,
Household appliances parts, automobile manufacturing parts, screw preventive mechanical parts, chemical machinery parts, chemical equipment, etc.
PA6 Screw Machine Parts Nylon bushing performance:
High mechanical strength, stiffness, hardness, toughness, aging resistance, mechanical shock absorption, sliding properties, wear resistance, good machining performance, creep resistance, and dimensional stability.
Blue MC901: higher toughness, flexibility and fatigue resistance than cast nylon
PA6+ oil (green) improves wear resistance, reduces friction coefficient, and is self-lubricating
PA6+Molybdenum disulfide (gray black): impact resistance, fatigue resistance, high load
Milling PA6 6 Nylon Application
It is suitable for making wear-resistant parts, transmission structural parts, household appliances parts, automobile manufacturing parts, anti-mechanical parts, Chinese industrial equipment, electrical insulation parts. Such as turbines, gears, bearings, impellers, blades, screw rods, high-pressure washers, sealing rings, nuts, screws, shuttles, sleeves, sleeve connectors, etc.
HONY®MC nylon Properties Data Sheet
| Properties | Test Method | Unit | Value |
| Physical Properties | |||
| Density | ISO 1183 | g/cm3 | 1.15 |
| Water absorption | ISO 62 | % | 1.28 |
| Electrical Properties | |||
| Surface Resistivity | ASTM D257 | ohms | 10^12Ω |
| Volume Resistivity | ASTM D257 | ohms.cm | 10^12Ω |
| Dielectric Constant | ASTM D150 | / | 3.9 |
| Dielectric Coefficient | ASTM D150 | / | 0.031 |
| Mechanical Properties | |||
| Tensile strength | ASTM D638 | MPa | 74 |
| Elongation at break | ASTM D638 | % | 5 |
| Flexural strength | ASTM D790 | MPa | 90 |
| Elastic bending modulus | ASTM D790 | MPa | 2200 |
| Impact strength (notched) | ASTM D256 | KJ/M2 | 5 |
| Hardness | ASTM D785 | MPa | 85 |
| Thermal Properties | |||
| Vicat softening temperature | DIN53 736 | ℃（F） | 70 |
| Glass transition temperature | DIN53 736 | ℃（F） | 85 |
| Heat distortion temperature | DIN53 461 | ℃（F） | 160 |
| Heat Conductivity | 23℃ | ℃（F） | 0.23 |
| CLTE | ASTM D792 | 1/K.15-5 | 8 |
| Flammability | UL94 |
|
HB |
Main production
If you are interested in the product, contact 2bvideo.com for more information for more information
The information of 2bvideo.com limited shown above is provided by the user or collected on the network. Video 2B does not guarantee the authenticity,accuracy and legitimacy of 2bvideo.com limited information. Video 2B does not involve legal relationships and disputes between users arising from transactions other than secured transactions on this website. Disputes shall be settled by you through negotiation. If you are the person in charge or relevant employee of this enterprise, if you find that the enterprise information is incorrect or want to manage thiscompany, please contact us jacklee1558@gmail.com, after you claim the enterprise, you can obtain management permission, publish supplyand demand information, bring consulting orders, and remove page advertisements.
Main Product:
Plastics Sheet,
Plastics Rod,
CNC Plastic Machined Parts ,
CNC Metal Machined Parts,
Plastics Injection Molding,
Antistatic Material
