Product
Product
Supplier
Search
Get Quote
730 people are quoting
Ceramic Ferrite Magnet for Cow Stomach Magnet
Anisotropic ferrite magnet
The Anisotropic Ferrite Magnets have a preferred direction of magnetisation within the structure and have strongest magnetic properties along that direction (they are more powerful than isotropic ferrite magnets). There are two chemical varieties of ferrite magnet.
characteristic
The powder metallurgy method has low remanence and low recovery magnetic permeability. High coercivity, strong anti-demagnetization ability, especially suitable for dynamic working conditions of magnetic circuit structure. Hard and brittle material, can be used for emery tools for cutting processing. The main raw material is oxide, so it is not easily corroded. Operating temperature :-40℃ to +200℃.
Ferrite magnets are divided into anisotropic (heterotropic) and isotropic (isotropic). The magnetic properties of the isotropic sintered ferrite materials are weak, but they can be magnetized in different directions of the magnet. Heteromorphic sintered ferrite permanent magnet materials have strong magnetic properties, but only along the intended direction of magnetization of the magnet.
Physical property
In the actual production of ferrite magnets, raw materials with good chemical composition may not be able to obtain ferrite magnets with good properties and microstructure sometimes, because of the influence of physical properties. The listed physical properties of iron oxide include mean particle size APS, specific surface area SSA, and loose density BD. As iron oxide accounts for about 70% in the formula of manganese zinc ferrite magnet, its APS value has a great influence on the APS value of ferrite magnet powder. Generally speaking, the APS value of iron oxide is small, and the APS value of ferrite magnet powder is also small, which is conducive to speeding up the speed of chemical reaction. However, the APS value should not be too small considering that the fine particle of powder is not conducive to post-process pressing and sintering easy crystallization. Obviously, when the APS value of iron oxide is too large, only the diffusion reaction of spinel phase can be carried out in the pre-firing process due to the large particle size, and the grain growth process can not be further carried out. This inevitably leads to the increase of activation energy required during sintering, which is not conducive to solid phase reaction.
The main performance and grade parameters of sintered permanent magnet ferrite
Material
Grade
(Br)
(HcB)
(HcJ)
(BH)max
mT
KGauss
KA/m
KOe
KA/m
KOe
KJ/m3
MGOe
Y8T
200~235
2.0~2.35
125-160
1.57-2.01
210-280
2.64-3.51
6.5-9.5
0.8-1.2
Y22H
310~360
3.10~3.60
220-250
2.76-3.14
280-320
3.51-4.02
20.0-24.0
2.5-3.0
Y25
360~400
3.60~4.00
135-170
1.70-2.14
140-200
1.76-2.51
22.5-28.0
2.8-3.5
Y26H-1
360~390
3.60~3.90
200-250
2.51-3.14
225-255
2.83-3.20
23.0-28.0
2.9-3.5
Y26H-2
360~380
3.60~3.80
263-288
3.30-3.62
318-350
3.99-4.40
24.0-28.0
3.0-3.5
Y27H
350~380
3.50~3.80
225-240
2.83-3.01
235-260
2.95-3.27
25.0-29.0
3.1-3.6
Y28
370~400
3.70~4.00
175-210
2.20-3.64
180-220
2.26-2.76
26.0-30.0
3.3-3.8
Y28H-1
380~400
3.80~4.00
240-260
3.01-3.27
250-280
3.14-3.52
27.0-30.0
3.4-3.8
Y28H-2
360~380
3.60~3.80
271-295
3.40-3.70
382-405
4.80-5.08
26.0-30.0
3.3-3.8
Y30H-1
380~400
3.80~4.00
230-275
2.89-3.46
235-290
2.95-3.64
27.0-32.5
3.4-4.1
Y30H-2
395~415
3.95~4.15
275-300
3.45-3.77
310-335
3.89-4.20
27.0-32.0
3.4-4.0
Y32
400~420
4.00~4.20
160-190
2.01-2.39
165-195
2.07-2.45
30.0-33.5
3.8-4.2
Y32H-1
400~420
4.00~4.20
190-230
2.39-2.89
230-250
2.89-3.14
31.5-35.0
3.9-4.4
Y32H-2
400~440
4.00~4.40
224-240
2.81-3.01
230-250
2.89-3.14
31.0-34.0
3.9-4.3
Y33
410~430
4.10~4.30
220-250
2.76-3.14
225-255
2.83-3.20
31.5-35.0
3.9-4.4
Y33H
410~430
4.10~4.30
250-270
3.14-3.39
250-275
3.14-3.45
31.5-35.0
3.9-4.4
Y34
420~440
4.20~4.40
200-230
2.51-2.89
205-235
2.57-2.95
32.5-36.0
4.1-4.4
Y35
430~450
4.30~4.50
215-239
2.70-3.00
217-241
2.73-3.03
33.1-38.2
4.1-4.8
Y36
430~450
4.30~4.50
247-271
3.10-3.40
250-274
3.14-3.44
35.1-38.3
4.4-4.8
Y38
440~460
4.40~4.60
285-305
3.58-3.83
294-310
3.69-3.89
36.6-40.6
4.6-5.1
Y40
440~460
4.40~4.60
330-354
4.15-4.45
340-360
4.27-4.52
37.6-41.8
4.7-5.2
If you are interested in the product, contact 2bvideo.com for more information for more information
The information of 2bvideo.com limited shown above is provided by the user or collected on the network. Video 2B does not guarantee the authenticity,accuracy and legitimacy of 2bvideo.com limited information. Video 2B does not involve legal relationships and disputes between users arising from transactions other than secured transactions on this website. Disputes shall be settled by you through negotiation. If you are the person in charge or relevant employee of this enterprise, if you find that the enterprise information is incorrect or want to manage thiscompany, please contact us jacklee1558@gmail.com, after you claim the enterprise, you can obtain management permission, publish supplyand demand information, bring consulting orders, and remove page advertisements.
Main Product:
Permanent Ferrite Magnets,
Isotropic Ferrite Magnets,
Anisotropic Ferrite Magnets ,
Anisotropic Ferrite Magnet Rotor,
Isotropic Multipole Magnetic Rotor,
Sintered Neodymium Magnets
