Hollow Anchor Rod

Hollow Anchor Rod

2 year ago

19 0

SHANDONG HUITONG STEEL CO.,LTD

 4 year year

Product details

Product Introduction
Hollow anchor bar means a rod that transfers the structures or geotechnical load to a stable rock formations, anchor bolt consists of rod, drill bit, coupling, plate, grouting stopper and nut. Widely used as an efficient anchoring means, in tunnel pre-support, slope, coast, mine, water conservancy projects, building foundation, roadbed reinforcement and geological diseases treatment such as landslip, crack, sink age. It’s irreplaceable in narrow construction environment. Hollow anchor bar is made of carbon seamless steel pipe with high strength.

Features of Hollow Grouting Anchor Bar:
• Fits standard Boomer, ROC and Mustang rigs.
• Particularly suitable for difficult ground conditions.
• A high rate of installation since drilling, placing and grouting can be performed in one single operation.
• Self drilling system eliminates the requirement for a cased borehole.
• Installation with simultaneous drilling and grouting possible.
• Easy installation in all directions, also upwards.
• Suitable for working in limited space, height and in areas of difficult access.
• Simple post grouting system.
• Hot-dipped galvanizing for corrosion protection

Hollow anchor bar

Product Specification

thread hollow bar

R-Thread Anchor Rod Technial Data

	R25N	R32N	R32S	R38N	R51L	R51N	T76N	T76S
Outside diameter (mm)	25	32	32	38	51	51	76	76
Internal diameter (mm)	14	19	16	19	36	33	52	45
Ultimate load capacity (KN)	200	280	360	500	550	800	1600	1900
Yield load capacity (KN)	150	230	280	400	450	630	1200	1500
Tensile strength, Rp0.2 (N/mm2)	800	800	800	800	800	800	800	800
Yield strength, Rp0.2 (N/mm2)	650	650	650	650	650	650	650	650
Weight (Kg/m)	2.3	3.2	3.6	5.5	6.5	8.0	16.0	19.7
Thread type (left-hand)	ISO 10208				ISO 1720		MAI T76 Standard
Steel grade	En10083-1 (Alloy structure steel)
Steel grade	Compared to carbon steel, alloy structure steel has high anti-corrosion capacity and high mechanical.

R thread anchor bar or called rock rod, soil nail, which is a kind of threaded hollow bar, bar surface with an rope thread according to ISO 10208 & 1720. It was firstly invented by MAI on 1960S to solve the low construction speed on complicated underground works, nowadays; it is very popular all around the world.

Thread size: R25, R32, R38, R51, T76.

Thread standard: ISO10208, ISO1720 etc.

T-Thread Anchor Rod Technial Data

Bar Type	Outside Diameter (mm)	Inside Diameter (mm)	Cross section (mm2)	Ultimate Load KN	Yield Point KN	Weight (kg/m)	Thread Left/ Right Hand
T30/11	30	11	446	320	260	3.3	Lift or right
T30/14	30	14	395	260	220	2.9	Lift or right
T30/16	30	16	382	220	180	2.7	Lift or right
T40/16	40	16	879	660	525	7.0	Lift or right
T40/20	40	20	726	539	430	5.6	Lift or right
T52/26	52	26	1337	929	730	10.0	Lift or right
T73/53	73	53	1160	1630	970	12.3	Lift or right
T73/56	73	56	1094	1414	785	11.1	Lift or right
T73/45	73	45	2265	1630	1180	17.8	Lift or right

T thread anchor bar surface with a trapezoidal thread, this design of connection is much stronger and reliable when compared with rope thread, we supply full sizes from T30 to T103.

Thread size: T30, T40, T52, T73, T103, T127, T130.

Thread standard: ISO10208, ISO1720 etc.

Product And Factory Display

Hollow Grouting Anchor Bar

Hollow Grouting Anchor Rod

Product Test

Anchor Rod

Technology Process
The Self Drilling Anchor system is comprised of a hollow threaded anchor bar with a sacrificial drill bit that performs drilling,anchoring and grouting in a single operation. Self drilling anchor system is mainly used in slope stabilization, tunneling pre-support, foundations with micro piles etc projects.
1. Connect the alloy drill and anchor rod one end, on the other end, connect the drill sleeve and shank adapter, then connect the drilling rig or hand-held drill. Then start drilling, fill the cooling water while drilling.( If you want to lengthen the anchor rod, can connect the coupling, and then drilling)
2. Take down the drill, put the stop-grouting plug into the rod, and insert it to the hole, then ready to grout. Special circumstances like surrounding rock grouting tension is over or surrounding rock is too broken, can use anchor agent to seal the hole.
3. Connect quick grouting coupling and anchor rod end, connect other end of grouting machine.
4. Start grouting, when grouting full and reach design value then power off. Grouting pressure according to the design parameters and grouting machine performance determine, Cement/sand reference values is 1:0 ~ 1:1, water/cement reference value is 0.45:1 ~ 0.5:1.
5. Install anchor plate and nuts, and tighten nuts.
Application:
During the constructions of underground works, it is very common to encounter soft rock, fractured zone and large deformation due to high ground stress. In the case of serious collapsing, grouting anchor rod extra-long anchor is needed instead of ordinary one.

Packaging And Transportation

The packaging is packaged in tarpaulins and wooden boxes to ensure that it will not rust and corrode in the process of encountering water.

Self Drilling Anchor Bolt

FAQ
Q1:Can you send samples?
A:Of course, we can provide customers with free samples and express shipping service to all over of the world.
Q2:What product information do I need to provide?
A:Please kindly provide the grade, width, thickness, surface treatment requirement should you have and quantities you need to purchase.
Q3:It's my first time to import steel products, can you help me with it?
A:Sure,we have agent to arrange the shipment, we will do it together with you.
Q4:What ports of shipment are there?
A:Under normal circumstances, we ship from Shanghai, Tianjin, Qingdao, Ningbo ports, you can specify other ports according to your needs.
Q5:What is your terms of payment?
A:Payment<=1000USD, 100% in advance. Payment>=1000USD, 30% T/T in advance, balance before shipment or based on BL copy or LC at sight.
Q6:Do you provide custom made Products service?
A: Yes,if you have your own design , we can produce according to your specification and drawing.
Q7:What are the certifications for your products?
A:We have ISO 9001, MTC, third parties' inspections are all available such SGS, BV ect.
Q8:How long does your delivery time take?
A:In general, our delivery time is within 7-15 days, and may be longer if the quantity is extremely large or special circumstances occur.
Q9: How many countries you already exported to?
A:We have exported to America, Canada, Brazil, Chile, Colombia, Russia, Ukraine, Thailand, Myanmar, Vietnam, India, Kenya, Ghana,somalia and other African countries.Our export experience is rich, we familiar with different market demands, can help customers avoid a lot of trouble.
Q10:Can I go to your factory to visit?
A:Of course, we welcome customers from all over the world to visit our factory.
Q11:Does the product have quality inspection before loading?
A:Of course, all our products are strictly tested for quality before packaging, and unqualified products will be destroyed and customers can appoint third parties to inspect the products before loading too.
Q12:How to pack the products?
A: Standard export sea-worthy packaging, the inner layer has a waterproof paper outer layer with iron packaging and is fixed with a fumigation wooden pallet. It can effectively protect products from corrosion and various climate changes during ocean transportation.