The target flowmeter is a new type of capacitive induction flowmeter developed on the basis of the traditional target flowmeter with the development of new sensors and microelectronics technology. It has the advantages of orifice plate, vortex street and other flowmeters. It has the characteristics of moving parts, and at the same time has high sensitivity, accuracy comparable to volumetric flow meters, and a wide measuring range.
Target flow meter product parameters
Diameter: DN15~DN3000mm
Measuring range: 0-400t/h
Nominal pressure: 0.6~42MPa
Working temperature: -200℃~+500℃
Accuracy: ±0.2~±1.5%FS
Turndown ratio: 1:10
Shell: carbon steel; stainless steel (or negotiated according to user requirements)
Power supply mode: built-in 3.6VDC lithium battery (replaced every two years, without signal output); external 24VDC (with signal output)
Output signal: 4~20mA two-wire system; pulse 0~1000HZ; RS232/RS485 (or negotiated according to user requirements)
Protection level: IP65; IP67
Explosion-proof mark: intrinsically safe ExiallCT4; explosion-proof ExdllCT4
Implementation standard: Q/BET05-06
Gauge display: cumulative flow; instantaneous flow; operating temperature; operating pressure (temperature and pressure compensation type only); rod full scale percentage; fault self-test
Connection flange: national standard (GB/T) series; chemical (HG) series; mechanical (JB/T) series; can also be negotiated and produced according to customer requirements
Typical applications of target flow meters
Gas type:
Coal gas, air, hydrogen, natural gas, nitrogen, liquefied petroleum gas, hydrogen peroxide, flue gas, methane, butane, chlorine, etc.
Liquid type:
Heavy oil, paraffin, asphalt, sulfuric acid, edible oil, residual oil, acetone, diesel, mine water, detergent, soy sauce, gasoline, silicone oil, syrup, solvent, perfume, seawater, aviation kerosene, soap water, glucose, rapeseed acid, Salt water, paste, ink, coolant, ethylene glycol, mineral oil, liquid sugar, hydrochloric acid, automotive paint, resin, butter, vegetable oil, liquid oxygen, shampoo, toothpaste, gel, fuel, milk, bleach , conditioner, soda, additive, cleaning agent, alkaline, ammonia, marine oil, chemical reagent, kerosene, glycerin, dye, water, nitric acid, high boiling point organic solution, lard, additive, alcohol, oil, ethylene, polypropylene , Jia Ben etc.
Steam type:
Superheated steam, saturated steam
Product features of target flowmeter
The entire instrument is designed with no moving parts, plug-in structure, and easy to disassemble.
A variety of anti-corrosion and high and low temperature resistant materials are available (such as Hastelloy, titanium, etc.)
The whole machine can be made fully sealed without dead corners (welded form), without any leakage points, and can withstand high pressure of 42MPa
The instrument is equipped with a self-test program, and the fault phenomenon is clear at a glance
The sensor does not come into contact with the measured medium, there is no wear of parts, and it is safe and reliable to use.
The dry calibration method can be adopted on-site, that is, the hanging weight method can be used. Calibration can be completed with one-button operation
There are a variety of installation methods to choose from, such as online plug-in type, which has low installation costs.
With integrated temperature and pressure compensation, it can directly output the quality or standard.
With optional small signal removal, nonlinear correction, and optional filtering time
It can accurately measure gas and liquid flow rates under various normal temperature, high temperature 500 degrees, and low temperature -200 degrees conditions.
Accurate measurement, accuracy can reach 0.2%
Good repeatability, generally 0.05~0.08%, fast measurement
The pressure loss is small, only about 1/2△P of the standard orifice plate
Excellent anti-interference and anti-impurity ability
The flow rate range can be changed by replacing the flow blocking piece (target piece) according to actual needs.
Low-power battery on-site display, the value can be read directly online, and the display screen can read instantaneous and cumulative flow and percentage bar graphs at the same time
Easy to install and easy to maintain
Multiple output forms, capable of transmitting various parameters remotely
Strong vibration resistance, can measure pulsating flow within a certain range
Our main products are: Electromagnetic flowmeter, Energy meter, Vortex flowmeter, Pressure transmitters, Level gauge, Magnetic flap level gauge.