Solar folding bag appearance effect~1

12 month ago

37 0

Shengtian New Energy (Shenzhen) Co., Ltd.

 1 min year

Product details

ETFE Waterproof Handheld Folding Solar Bag

I. Product Features:
This product is suitable for photovoltaic power generation system, for a variety of energy storage power supply in outdoor sunlight charging. In order to improve the portability of solar panels, anti-drop performance, easy maintenance and installation access and design.
 Solar folding bag product is lightweight, compact and reasonable shape, one-piece magnetic carrying handle/magnetic bracket is easy to open and close, standard with support bracket, suitable for outdoor carrying and use.
 The solar panel adopts FR-4 glass fibre sheet substrate + EVA + ETFE protective film lamination encapsulation process, the product life is up to 10 years.
 Produced with high-efficiency A-grade monocrystalline silicon cells, the photoelectric efficiency of the cells is more than 22%.
 The products are waterproof and dirt-resistant, easy to clean after dirtying.
 This series of solar folding bag is suitable for charging energy storage batteries with rated voltage DC12-14V (need to connect the charge protection controller separately).
 The product has a certain degree of resistance to falls (can withstand a fall of up to 1 metre, the front of the solar panel should not be hit on sharp objects to prevent damage to the internal solar cells).
 comes standard with 5521 DC output port, output cable, and output interface can be customised.
 adopts waterproof fabrics and processes, such as rain and water does not affect the normal use of water, (Note that not be seawater and other conductive/corrosive liquid contact, which may lead to internal short-circuit caused by the failure of normal power generation, if contact with water rinse clean and dry can be)
 can be customised according to the user's needs (colour/power/voltage/outline dimensions, etc.)

Model	ST100M-12-C
Peak power Pm(W)	100W
Open circuit voltage Voc(V)	24.0V
Max. power voltage Vmp(V)	20.0V
Max. power current Imp(A)	5.00A
Short circuit current Isc(A)	5.25A
Solar cells Efficiency	22.0%
Solar panel model&number	*50W2pcs**
Folding size	*61556035mm*
Deployment size	*123056025mm*
Reference net weight	4.45kg
solar cell	High Efficiency Grade A Monocrystalline Silicon Cells
Solar panel Front cover(material)	■Transparent ETFE □Transparent composite material on cell surface for enhanced protection
Solar panel backboard(material)	■Glass fibre plate
Output port	1：■Direct outlet mode, DC5521 male + 30CM cable (matching 2m extension cable) 2：□Direct outlet mode, PV special connector + 30CM cable (matching 2m extension cable) 3：□With USB outlet box mode: USB fast charger 1 + Type-C 65W 1 + DC5521 female chassis *1 (supporting 2m DC5521 male - DC5521 male extension cable) Optional/customised
solar folding handbag material	■Grey (waterproof) Colour/pattern can be customised Silkscreen printing available
NOCT/Operating temperature limits	Rated Operating Temperature: 48±2°C / Operating Temperature Range: -40°C- +85°C
Storage temperature limits	-10℃- +30℃
Waterproof grade	IP65
Power/Voltage/Current Temperature Coefficient	-0.35%/℃ ；-0.272%/℃；+0.044%/℃
Life/ Warranty	Lifespan ≥ 10 years / 1 year warranty
STC	Irradiance:1000W/m2,Temperature:25℃,AM:1.5
Other	One-piece magnetic carrying handle■Orange □Greener Selectable
Package Size/Weight Reference Data	*Outer size of single piece carton: 58560670mm Gross weight: 5.0KG/ctn.* *Outer size of carton: 605260700 mm (4 pieces/carton) Gross weight: 22KG/ctn.*

III. Instructions for use
3.1: Schematic diagram of the electrical principle of solar energy connection

Waterproof Handheld Folding Solar Bag

When connecting the controller, be sure to connect the battery first, then the PV panel

3.2: Folding solar bag use precautions
1: The solar panel should be placed in direct sunlight, and adjust the appropriate angle to receive light to obtain the maximum power generation effect.
2: This product is suitable for the rated voltage DC 12-14V mobile energy storage power supply equipment (need to be built-in solar charging protection) or battery charging, but can not use the output electrode of the solar panels directly to the battery charging, must be installed with a solar charge controller in order to protect the battery from overcharging or to prevent the connection of the electrode to prevent the opposite of the solar panels/batteries and personnel caused by uncontrollable damage. If the equipment is an all-in-one energy storage machine, it can be connected to the corresponding solar charging interface according to the requirements of the manufacturers of the all-in-one energy storage machine.
3: such as rain and water does not affect the normal use, (note that not be seawater and other conductive/corrosive liquid contact will lead to internal short-circuiting of the junction box can not be normal power generation, such as contact in a timely manner with water to rinse clean and dry can)
4: Access to the solar controller / energy storage machine, pay attention to the interface positive and negative should be accessed correctly.
5: Access to the solar controller / battery / energy storage machine should be checked in detail before its product specifications / power / current / voltage requirements, not to exceed its limits, in order to prevent damage to the equipment, to avoid causing uncontrollable consequences.
6: This equipment in the light of the voltage does not exceed the human body safety voltage, but should also avoid direct contact or short circuit equipment electrodes, to avoid electric shock or cause safety hazards!
7: The use of light should be gently held and placed, it is strictly prohibited to drop, heavy pressure, impact, otherwise it may seriously damage the solar cell!
Waterproof Handheld Folding Solar Bag

Our other popular products

Monocrystalline Solar Panels
Corrosion-Resistant ETFE Solar Panels
Frosted PET Solar Panels
Sunpower SMT