400WETFE Folding bag appearance~1

12 month ago

39 0

Shengtian New Energy (Shenzhen) Co., Ltd.

 1 min year

Product details

All-in-one 400W Waterproof Folding Solar Bag

I. Product Features:
This product is suitable for photovoltaic power generation system, for a variety of energy storage power supply in outdoor sunlight charging. In order to improve the portability of solar panels, anti-drop performance, easy maintenance and installation access and design.
 Solar folding bag product is lightweight, compact and reasonable shape, one-piece magnetic carrying handle/magnetic bracket is easy to open and close, standard with support bracket, suitable for outdoor carrying and use.
 The solar panel adopts FR-4 glass fibre sheet substrate + EVA + ETFE protective film lamination encapsulation process, the product life is up to 10 years.
 Produced with high-efficiency A-grade monocrystalline silicon cells, the photoelectric efficiency of the cells is more than 22%.
 The products are waterproof and dirt-resistant, easy to clean after dirtying.
 This series of solar folding bag is suitable for charging energy storage batteries with rated voltage DC24-28V (need to connect the charge protection controller separately).
 The product has a certain degree of resistance to falls and impacts (400W specification is heavier and can only withstand a fall of 0.3 metres or less, and the front of the solar panel should not be hit on sharp objects to prevent damage to the internal solar cells).
 comes standard with PV-specific output ports, output cables, and output connectors can be customised.
 adopts waterproof fabric and process, such as rain and water does not affect the normal use, (note that not be seawater and other conductive/corrosive liquid contact, may lead to internal short-circuit caused by the failure of normal power generation, such as contact with the clean water rinse clean and dry can be)
 can be customised according to the user's needs (colour/power/voltage/outline dimensions, etc.)

	Model	ST400M-36-C
	Peak power Pm(W)	400W
	Open circuit voltage Voc(V)	43.0V
	Max. power voltage Vmp(V)	36.0V
	Max. power current Imp(A)	11.11A
	Short circuit current Isc(A)	11.66A
	Solar cells Efficiency	22.0%
	Solar panel model&number	*100W4pcs**
	Folding size	*107463145*mm
	Deployment size	*2370107425*mm
	Reference net weight	16.6Kg
	solar cell	High Efficiency Grade A Monocrystalline Silicon Cells
	Solar panel Front cover(material)	■Transparent ETFE □Transparent composite material on cell surface for enhanced protection
	Solar panel backboard(material)	■Glass fibre plate
	Output port	1: ■Direct outlet method, PV special connector + 30CM wire Optional/Customised
	solar folding handbag material	■Grey (waterproof) Colour/pattern can be customised Silkscreen printing available
	NOCT/Operating temperature limits	Rated Operating Temperature: 48±2°C / Operating Temperature Range: -40°C- +85°C
	Storage temperature limits	-10℃- +30℃
	Waterproof grade	IP65
	Power/Voltage/Current Temperature Coefficient	-0.35%/℃ ；-0.272%/℃；+0.044%/℃
	Life/ Warranty	Lifespan ≥ 10 years / 1 year warranty
	STC	Irradiance:1000W/m2,Temperature:25℃,AM:1.5
	Other	One-piece magnetic carrying handle ■Orange □Green selectable
	Package Size/Weight Reference Data	Outer size of single piece carton: 113090695mm Gross weight: 18.5KG/ctn. Outer size of carton: 1155195730 mm (2 pieces/carton) Gross weight: 39KG/ctn.

III. Instructions for use
3.1: Schematic diagram of the electrical principle of solar energy connection
Folding Solar Panels

When connecting the controller, be sure to connect the battery first, then the PV panel
3.2: Folding solar bag use precautions
1: The solar panel should be placed in direct sunlight, and adjust the appropriate angle to receive light to obtain the maximum power generation effect.
2: This product is suitable for the rated voltage DC 12-14V mobile energy storage power supply equipment (need to be built-in solar charging protection) or battery charging, but can not use the output electrode of the solar panels directly to the battery charging, must be installed with a solar charge controller in order to protect the battery from overcharging or to prevent the connection of the electrode to prevent the opposite of the solar panels/batteries and personnel caused by uncontrollable damage. If the equipment is an all-in-one energy storage machine, it can be connected to the corresponding solar charging interface according to the requirements of the manufacturers of the all-in-one energy storage machine.
3: such as rain and water does not affect the normal use, (note that not be seawater and other conductive/corrosive liquid contact will lead to internal short-circuiting of the junction box can not be normal power generation, such as contact in a timely manner with water to rinse clean and dry can)
4: Access to the solar controller / energy storage machine, pay attention to the interface positive and negative should be accessed correctly.
5: Access to the solar controller / battery / energy storage machine should be checked in detail before its product specifications / power / current / voltage requirements, not to exceed its limits, in order to prevent damage to the equipment, to avoid causing uncontrollable consequences.
6: This equipment in the light of the voltage does not exceed the human body safety voltage, but should also avoid direct contact or short circuit equipment electrodes, to avoid electric shock or cause safety hazards!
7: The use of light should be held lightly, is strictly prohibited to drop, impact, or may seriously damage the solar cell!

folding waterproof travel bag

Our other popular products

Monocrystalline Solar Panels
Corrosion-Resistant ETFE Solar Panels
Frosted PET Solar Panels
Sunpower SMT