COATING MACHINE

4 year ago

23 0

 1 min year

Product details

PLTD-High Quality Coating Machinery

1.Main parameters

Maximum width of machinery	Roll length 2200mm
Product width	800-2000mm
Production line speed	5-80m/min
Speed control way	Frequency conversion synchronous speed regulation
The heat source	Gas heating
Drying room temperature：	120-200℃
Drying room heating form	Hot air circulation
Conduction form	Horizontal needle pull amplitude force root rail

3. Equipment composition

（1）Cloth entry frame (including automatic centering machine)	1 SET
（2）Double knife of coating machine head	1 SET
（3）12m drying cabinet	1 SET
（4）Cooling fan	1 SET
（5）Tail	1 SET
（6）two-roll cooling
（7）flat falling cloth
（8）Electrical control	1 SET

4. Structure

1) Cloth entry frame

（1）Rack（σ=4mm，A3 steel ）	1 SET
（2）Cloth cross rod(φ60mm stainless steel tube )	3 PCS
（3）Cloth guide roller φ100X2200mm（with P206 bearing）	3 PCS
（4）Cloth tight apparatus（φ60mm stainless steel tube）	1 SET
（5）Tight cloth reducer (with handwheel connecting rod)	1 SET
（5）Automatic centering machine	1 SET
（6）Centralized operation cabinet	1 SET

2)Integrated head for Coating &cloth-entry

（1）The base is welded with channel steel	1 SET
（2）Body is welded with 10mm steel plate	1 SET
（3）Coating knife (high quality carbon steel, hard chrome plating on the surface, precision grinding, tip inlaid alloy)	1 PCS
（4）Coating platform (high quality carbon steel, hard chrome plating on the surface, precision grinding)	1 SET
（5）Knife holder (HT200)	1 SET
（6）Pneumatic rapid knife lifting device (φ125×80 cylinder)	1 SET
（7）Manually adjust the coating knife Angle device	1 SET
（8）Aluminum alloy opening roller (ф 160x2200mm)	1 PCS
（9）Guide roller φ100X2200mm (with P205 bearing)	2 PCS
（10）Pedal (channel steel 8#, δ=4 pattern plate, width 1 m)	1 SET

3)Rail/track

（1）The track length of feeding area is 3 meters
（2）Horizontal cast iron ligen track	1 SET
（3）The chain adopts high temperature resistant material with pitch of 101.6mm	SOME
（4）High strength and toughness steel needle	SOME
（5）The door amplitude adjustment system adopts the same casting.	10 PCS
（6）Door width adjustment the whole car adopts electric combined drive	1 SET
（7）The track block is welded with steel plate and square steel	10 SETS
（8）ulley adjusting screw (45# steel T42X6)	5 PCS
（9）Screw adjusting sprocket chain	1 SET
（10）Screw bearing (FL206)	10 PCS

4)Cabinet

（1）Dry cabinet is welded with high quality steel (8# 10# 12#)	4 GROUPS
（2）The door panel, the bottom plate is galvanized sheet, the thickness is 120mm, the middle is made of high density rock wool board for heat preservation, and the sealing strip is made of silica gel (with adjustable handle fan plate).	4 SETS
（3）Circulation fan for 5.5KW high temperature fan (Wuxi Xiangda)	8 SETS
（4）The circulating fan impeller is 6.5# standard centrifugal impeller	8 SETS
（5）Detachable nozzle (galvanized sheet)	4 GROUPS
（6）The top of the dry cabinet is provided with 1 group/set of dehumidification fan	1 SET
（7）Amplitude modulation motor (1.5kW cycloid reducer)	1 SET
（8）Amplitude modulation ground axle box	8 SETS
（9）Burner -BENTONE	4 SETS

5) The tail

（1）The frame is welded with high quality steel plate- channel steel	1 SET
（2）The main transmission box of the chain adopts a circular root gear box	1 SET
（3）Needle stripping roller ф 100mm (with P206 bearing)	1 PCS
（4）Amplitude modulation screw (T42x6)	1 SET
（5）Screw live ling (copper)	1 SET
（6）The main drive motor is 11kW cycloidal motor, and the reducer is controlled by frequency conversion	1 SET
（7）Amplitude modulation motor (0.37KW)	1 SET
（8）Main drive sprocket chain	1 SET
（9）Amplitude modulation sprocket chain	1 SET
（10）Main drive spline shaft (with P210 F210 sprocket chain)	1 SET

6)Two roller cooler

（1）The frame is welded with section steel plate	1 SET
（2）φ570x2200mm cold water roller (with F212 bearing seat)	2 PCS
（3）Guide roller φ100mm (with P206 FL206 bearing)	2 PCS
（4）Water rotary joint (1 ", one-way)	4 PCS
（5）Drive sprocket chain	1 SET
（6）2# cycloid reducer and 3KW motor	1 SET