Butterfly valve

3 year ago

75 0

Wenzhou suote pharmaceutical and chemical engineering CO.,LTD

 4 year year

Product details

Product Description

DESCRIPTION

Tube OD: 1-1/2 Inch, Ferrule Size: 50.5MM, Fits 1.5 Inch Tri-clamp

* Material: SAE 304 Stainless Steel，Max Temperature：130°C，Max Pressure: 10 Bar (145 PSI)
* Adjustable pressure via spring replacement (1 spring included)- Quickly comes apart for easy cleaning
* This one-way check valve allows flow in only one direction. When flow stops the valve automatically closes to stop materials from back-flowing
* The pressure required to open the valve and be adjust by swapping out the inner spring (only one spring included) or rotating the spring plate

Welded check valve for easy process flow control

Size:1.5"

1.5 inch Sanitary Check Valve:Sanitary check valve , also known as “non-return valve”,is designed for use in process piping installations to prevent reverse flow. Sanitary check valve series is a spring check valve with different connection ends. 100 Percent tested / 100 percent inspected. 100 Percent pressure hydraulic tested for reliability. Wetted surfaces polished.
Actuation available: double-acting, air-to-spring, electric.
Sanitary check valve is a type of valve which open or close the valve rely on the medium flow itself. A check valve opens when the pressure below the valve plug exceeds the pressure above the valve plug and the spring force. The valve closes when pressure equalization has been achieved. The main function of the check valve is to prevent the fluid flowing back keeping the flow always in one direction. It is well applied to stainless steel pipe systems for food beverage, dairy, brewing,
pharmaceuatical, bio-pharmaceuatical and chemical industries.also an ideal solution along any Tri Clamp fitted system to mitigate back flow

Demountable
Detachable connection:The body can be taken apart.

No material accumulation

By rotating the handle, the motion disk parallel to the flow of water.High water flow and low resistance.

Size (Tube OD)	Part Number	Dimensions	Cracking Pressure (PSI)	Flow Coefficient (CV)
Size (Tube OD)	Part Number		Cracking Pressure (PSI)	Flow Coefficient (CV)	A	B	C
1/2"	45MP-.50-CD-316	2.700”	2.7	5
3/4"	45MP-.75-CD-316	2.700”	2.7	4
1 "	45MP-1-CD-316	3.290"	1.6	20
1-1/2"	45MP-1.5-CD-316	3.360"	1.6	20
2 "	45MP-2-CD-316	3.360"	1.4	40
2-1/2"	45MP-2.5-CD-316	3.360"	0.9	60
3”	45MP-3-CD-316	3.360"	0.5	100
4“	45MP-4-CD-316	4.030"	0.5	210

Sanitary Size	OD of Flange End	ID of Tube	OD of Tube
1/2″	0.992	0.370	0.500
3/4″	0.992	0.620	0.750
1″	1.984	0.870	1.000
1 1/2″	1.984	1.370	1.500
2″	2.516	1.870	2.000
2 1/2″	3.047	2.370	2.500
3″	3.579	2.870	3.000
4″	4.682	3.834	4.000
6″	6.562	5.782	6.000
8″	8.602	7.782	8.000
10″	10.570	9.782	10.000
12″	12.570	11.760	12.000

Details Images

Other products include strainers and pumps.If you want to know more about our products just check Sanitary Valve & Fitting web.

FAQ

Q: can you push gas (oxygen) through this? What is minimum pressure requirement?

A: It is possible and some customers have used fittings like this in the past. The tri-clamp fittings are leakproof and cracking
pressures, dependent upon the size of the valve, are located lower down on this page.

Q: For the 1.5" tri-clamp. What size and type of gasket is used to join the two halves?

A: Our sanitary fitting sizes are universal. So for the 1 1/2" Tri-Clamp Fittings, you would choose the 1 1/2" Tri-Clamp Gasket
size.

Q:What materials are the internals for this Tri-Clamp Check Valve (stopper, o-ring, spring, spider disk)?

A:The O-Ring gasket is made of viton. All other components are 316 Stainless Steel.

Q:We need to autoclave this which is 250F, spec says max temp is 200F - can this be made autoclavable?

A: The valve you are looking for would most likely need to be designed for autoclave. The valves we offer are not designed in such a
manner. I'm sorry that we cannot be of more assistance for this one.

Q: Can we get a different o-ring than viton? We need compatibility for hydrochloric acid and sodium hydroxide.
A: We do offer alternative o-rings for the Tri-Clamp Check Valve. Please call us for more information.

Q: Are these check valves suitable for both vertical and horizontal installations?
A: Yes, these tri-clamp check valves can be used in both vertical and horizontal installations. Please verify cracking pressure along
with liquid weight which will impact the opening of check valve.

Q: What is the largest OD of the valve with the clamp used in the center?
A: I'm not sure if I understand your question correctly, but the largest outside diameter tri clamp check valve that we offer is 6".
Please call or email for additional information.

Q: What material is the green O-ring gasket in the check valve?
A: The O-Ring gasket in this clamp check valve is made up of Viton. Viton is a brand of synthetic rubber and fluoropolymer elastomer
commonly used in O-rings, chemical-resistant gloves, and other molded or extruded goods. Viton fluoroelastomers are categorized
under the ASTM D1418 and ISO 1629 designation of FKM.

Q: What is the overall length of this for 2"?
A: The 2" clamp check valve measures in at 4.583" from head to toe. For other sizes and dimensions please consult our sizing chart
found on the product page.

Company Profile

Wenzhou Suote Pharmaceutical and Chemical Engineering Co., Ltd.

We are high—tech enterprise specialized in design，manufacturing and installation of Pharmaceutical equipment, biochemical equipment，dairy and food equipment, environmental protection equipment，sanitary fluid pumps＆valves and etc.

Certifications