Product
Product
Supplier
Search
Get Quote
730 people are quoting
PD-Tensioning machine
This is a new type stenter heat setting machine,it can be widely used in the finishing process of woven goods, knitted fabrics and other textiles.
Scope of supply:
1. Cloth feeding device
1)Cloth entry rack
2)electric motor type inlet cloth rack into cloth width setting device
3)Tension adjustment mechanism
4)Slat type centering device
Product images
Stenter machine
Design range
1) Single layer, level recovery pin chain, up and down hot air circulation.
2)Cloth style:
Suitable for all kinds of cloth, especially for handle and shrinkage
3)Working width: 600-2300mm
4)Mechanical design speed: 0-100 M/MIN (M/MIN)
5)Main power supply: 380 VOLT 50 HZ 3 PH.
6)Maximum temperature: 220 degrees.
7)Shrink code device: adjustable range of shrinkage code -20~+100 more
8)Main transmission: motor 25HP and transmission parts.
9)Heating method: conduction oil
10) Color: main body: blue Cabinet cover: gray blue
Scope of supply
Setting operation area
1)Stainless steel cloth guide roll
2)Centralized control console:
3)Monitoring synchronization, overfeed, speed
4)Transmission roller, shrink code, and 12 inch touch screen is LG.
5)Double padder( For 6 and 8 chambers)
Finalized cloth entry area
1) Box structure for cloth entry
2)Transmission rope,1HP motor and transmission parts, Stainless steel fabric holder.
3)Upper cloth entry: 320MM rubber roller,3HP frequency conversion special motor 1 set
4)Bottom cloth entry:320MM rubber roller,3HP frequency conversion special motor 1 set
5) Diameter 114MM stainless steel spiral roller,2HP motor drive and transmission parts. 2 pcs
6) Diameter 114MM electric button weft aligning roll. 1 set
7)Pinning device, including 1/4 HP frequency conversion special motor, transmission parts, pinning rubber wheel and pinning brush.
8) Lower bracket allocated with the lower belt driving group. 1 pair
9)Overfeed pinning system, adjustable RANGE is -20 ~ +100﹪.
10) Safety device for track width. 1 pcs
11)Tentering track is 6.3 meters.
12)Digital speed control system for tension distribution, overfeed pinning PLC is LG.
13)Pneumatic decurler is Shanghai HeTian.
14)Cloth edges controller is of Foshan HuaGao Electronics.
15)Brush wheel.
16) Anti-loosening device and safety device.
Drying and setting chamber, parts of each chamber:
1)Track length of each chamber is 3 meters.
2)The oven is made of U-iron and Angle iron. With new rock wool for insulation.
3) Turbine design windmill and 1 motor drive,upper:10HP, lower: 10HP.
4)2 motors allocated with 1 Frequency converter.
5)Hot air nozzle vertically blowing (24 pipes) which is customized according to customer samples, with a gap of 150 mm.
6)Temperature sensing probe.
7)Extraction hot air circulation filter.
8)Up and down wind adjustment by frequency conversion.
7.Track with beam, horizontal reciprocation
1)Chain track is made of cast iron, resistant to high temperature and without deformation
2)With abrasion resistant metal slide plate.
3)Pin plate, pin plate seat and RP 172 adopts oil-lubricated chain.
8. Cooling device
1)Air cooling device, with 2 sets of 3HP blower.
2) Track length of cooling zone: 2800mm
9. Main driving
1)Driven by 25HP special motor and transmission parts.
10.Working width adjustment mechanism
1)Rear setting and cloth-exit area adjusted by 3HP motor.
2) Front tentering area adjusted by 1HP motor
3) Beam of tentering 2nd,3rd and cloth-exit area allocated with manual handle adjustment.( With slat roller)
11 .Exhaust windmill
1)Exhaust windmill (front 5HP, rear 7.5 HP motor with transmission parts.( With inverter)
[exhaust duct made by manufacturer]
12.Cloth-exit device
1)Box structure
2)Cloth lifting device
3)Edges cutting device and trimming suction device
4)Cloth-exit transmission roller,2HP motor and driving parts.
5)Plating roller,2HP motor and driving parts.
6)Track chain turning head, gear box and transmission device.
7) Electrostatic elimination rod and host device
8)PLC digital speed control system, overfeed pinning control
9)Cam With motor, frequency converter and transmission parts
10) Stainless steel cloth guiding roller
11)Cloth-exit device
13. Main control cabinet
A. Main apparatus are respectively installed in the control cabinet
B. Main control cabinet contains breaking appliances
C. Electromagnetic contactor
D. Relay
E. Transformer
F. Cooling fans of control cabinet (6 "* 9 sets)
G. Voltage stabilizer
14.Camera monitor system 1 set
15.Speedometer (metric) 2 pcs
16. width gauge (metric) 2 pcs
17.Length table (metric system) 1 pcs
18. Interphone 1 set
19.Secondary side wiring material (control cabinet to machine)
20.Basic diagram, structure diagram, circuit diagram, maintenance operation manual.
21. Spare parts
1)Overfeed pinning device 2 pcs
2)Needle plates 50 pcs
3)Needle plate seats 20pcs
4)Round brush 10 pcs
5)Screw square nut (for oven) 4 pcs
6)Screw square nut (for exit cabinet) 2 pcs
7)chains 10 pcs
8)Tool box 1 pcs
9)Overfeed belts 10 pcs
10)Dust filters 2 pcs
22.Brand of main parts
1)Main transmission motor and reduction motor Foshan Watman.
2) Programmable controller LG
3) Overfeed needle PLC LG
4) Low-voltage electrical appliance LG
5) Blowing type edge spreader Shanghai HeTian
6) Edge tracker Foshan HuaGao Electronics
7)Inverter SINEE
23. Buyer preparation
1)Basic cement project in the machine site.
2)Piping and piping insulation materials
3) Materials of exhaust pipe and chimney
4) Electric wiring of water source, power source to control cabinet.
5)Assistant workers during machine installation and trial period.
6) Heating conduit materials and piping works.
If you are interested in the product, contact 2bvideo.com for more information for more information
The information of 2bvideo.com limited shown above is provided by the user or collected on the network. Video 2B does not guarantee the authenticity,accuracy and legitimacy of 2bvideo.com limited information. Video 2B does not involve legal relationships and disputes between users arising from transactions other than secured transactions on this website. Disputes shall be settled by you through negotiation. If you are the person in charge or relevant employee of this enterprise, if you find that the enterprise information is incorrect or want to manage thiscompany, please contact us jacklee1558@gmail.com, after you claim the enterprise, you can obtain management permission, publish supplyand demand information, bring consulting orders, and remove page advertisements.
Main Product:
Dyeing Machines,
Dye Vats,
Garment Dyeings,
Washing Machines ,
Hydro Extractors,
Stenters Machines
