Large capacity oil press

3 year ago

231 0

Hebei Huipin Machinery Co.,LTD

 9 year year

Product details

Mustard Oil Production Line

Mustard oil is extracted from mustard seed, rich in nutritional value, loved by everyone.Hebei Huipin Machinery Co.,Ltd can contract for the

Cooking Oil Production Line Project from 5 Ton to 1000 Ton per day.

Our main products are as below:

1. Oilseed Pre-treatment Machinery;

2. Oil Press/ Oil Expeller/ Oil Pressing Machinery / Edible Oil Processing Equipment;

3. Oilseed Pressing Line

4. Oil Solvent Extraction Machinery/ Food Oil Leaching Equipment;

5. Cooking Oil Refining Machinery/Edible Oil Refinery Equipment, and other Cooking Oil Processing Equipment.

6. Oil Filter

7. Oil Tank

8. Silo

9. We can contract for the Cooking Oil Production Line / Edible Oil Plant Turnkey Project from 2 ton to 1000 ton per day.

Project Briefly

Name: Mustard Oil Production Line

Processing flow chart

Mustard Seed→Cleaning→Crush→De-iron→Softening→Flaking→Cooking and Frying-Pressing→Crude Oil→Filter - Crude Oil Refining Plant

Equipment Model and Feature

1.Oilseed Cleaning Machine

The corn germ recovered from corn grits processing,always mixed with more corn flour,broken powder and dander, in the process of oil due to the presence of starch, the first will absorb a certain amount of fat and remain in the cake;Followed by oil Blocking the impact of the oil; The third will increase the oil in the sediment, affecting the quality of oil,so the need for double-layer shaker for sifting.Corn germs Recycled corn germ, mixed with dander and radicle sheath and other impurities, need to use a shallow dish or sink to rinse with water several times in a row,such as cyclone separator available cyclone generated by the centrifugal effect,Isolated from the germ.

2. Oilseed Crushing Machine:

The processing is to make small of the corn germ to easy for extraction.

3.De-iron:

In this processing,to make sure the normal production, we need move the metal impurities from the material by permanent magnet machinery.

4.Softening - Oilseed Steam Cooker :

For the corn germ oil preparation of the first procedure.Softening is by regulating the moisture and temperature of corn embryo to enhance its plasticity. While the water and temperature interaction,mutual restraint, the general high water temperature should be lower;low water temperature should be higher. So the operation should be based on the size of corn germ moisture to control the level of temperature. At the same time in order to make corn germ eat vapor,to achieve uniform temperature, must ensure that a certain softening time, in order to achieve after softening of the corn germ does not clip raw,tender and soft,through and uniform operation requirements. In this process,the corn germ in the heat treatment at the same time the moisture content dropped to 10% or less, so that the material embryo plastic changes.Softening commonly used hot air dryer or hot steam roller dryer,material embryo in softening temperature rise should not be too hasty to prevent premature degeneration of protein leaving embryo lose elasticity,and thus affect the rolling embryo,steamed fried and pressing oil deal with.

5. Oilseed Flaking Machine / Oilseed Flaker:

Maize embryo after softening treatment, then by rolling mill rolling machine into 0.3 ~ 0.4mm thin slice, promote cell structure damage, shorten the oil path, to facilitate the embryo steamed fried and squeezed.

6.Cooking and Frying - Oilseed Steam Cooker:

Steaming is one of the most important processes in the oil-making process. Because it is through the role of moisture and temperature so that the internal structure of corn germ greatly changes in order to facilitate the oil from the corn embryo is relatively easy to be extracted.

7. Oil Press or Oil Expeller - Pressing of Oilseed:

Because the corn germ oil preparation mostly by the small scale and the auxiliary workshop carries on, therefore uses the spiral presses the most suitable. Model can be determined according to the scale of production,a slightly larger production plant, can be selected with steaming fried equipment assembly 200 screw press, the machine steamed fried both, continuous operation,the use of simple operation,the oil is done in one set of equipment at one time.

8.Oil Filter - Filter the crud oil:The processing is to removal the impurity

Main Equipment Description for Oilseed Pressing Plant:

This process is used YZY260 style high efficiency screw oil pressing machine.The technology of this oil press machine is introduced from German. And it is the large scale Edible Oil Mill Machine in China. It is combined the advantages which is sturdy and durable,easily to operate, high capacity, good feature of cake with bright color and lower residual oil.

YZY260 is widely used in many corn germ oil production line,it reduced the cost,and also improved the quality of the oil cake.

If you are interested in any of Screw Oil Press and Edible Oil Plant Project, pls contact us: admin(at)oilmillchina(dot)com

Sunflower Oil Pressing Line