1. moderate size: 18-liter capacity design, suitable for small and medium-sized dental clinics and dental laboratories, does not take up too much space, but also meets the daily sterilization needs.
2. Efficient sterilization: Adopting pressure steam sterilization technology, it can quickly reach and maintain the required temperature and pressure to ensure efficient killing of bacteria, viruses and spores.
3. Safe and reliable: Equipped with multiple safety protection devices, such as over-pressure protection, over-temperature protection, insufficient water level alarm, etc., to ensure the safety of the operation process.
4. Easy to operate: Intuitive control panel and simplified operation process make it easy for non-professionals to get started.
5. Energy-saving and environmental protection: optimized heating and cooling process reduces energy consumption and environmental pollution at the same time.
6. Customized design: different functions and configurations can be customized according to the specific needs of users to meet personalized use scenarios.
1. Sterilization chamber: made of stainless steel, corrosion-resistant, used for placing instruments and articles to be sterilized.
2. heating system: including heating element and temperature control device, responsible for heating water to boiling point and generating steam.
3. pressure control system: including pressure sensor and regulating valve, used to control the pressure inside the sterilizing chamber to ensure sterilization under the set pressure.
4. safety valve: when the pressure exceeds the safety range, it will automatically activate the pressure relief to prevent the equipment from being damaged due to high pressure.
5. control panel: contains a touch screen or buttons, used to set sterilization parameters, start the sterilization cycle and monitor the status of the equipment.
6. water tank: used to store the water needed for the sterilization process, usually equipped with a water level sensor.
7. exhaust system: used to exhaust the remaining steam and air at the end of the sterilization cycle.
8. wheels or base: to facilitate the movement and fixation of the equipment.
9. Insulation: Insulation material wrapped around the exterior of the equipment to minimize heat loss and increase energy efficiency.
18L Dental Sterilization Autoclave Manufacturing Process
1. Design and engineering:
- Product design is based on the sterilization requirements and the actual conditions of the dental clinic.
- Three-dimensional modeling using CAD (Computer Aided Design) software.
- Engineering analysis, including thermodynamic analysis, structural strength analysis, etc. 2.
2. Material preparation:
- Select suitable materials, usually use stainless steel or other corrosion-resistant, high-temperature-resistant alloy materials.
- Inspect the material to ensure that it meets the relevant national and industry standards.
3. Parts processing:
- Use CNC (Computer Numerical Control) machine tools to carry out precision machining to produce various parts of the autoclave, such as shells, doors, heating elements, control panels and so on.
- Surface treatment such as grinding and deburring is carried out on the finished parts.
4. Welding and assembly:
- Adopt professional welding technology, such as argon arc welding, to weld the shell, door and other parts of the autoclave together to ensure uniform seams and good sealing.
- Assemble the internal structure, including the heating system, pressure control system, safety valve and so on.
- Install the insulation and external decorative parts.
5. Commissioning and testing:
- Conduct electrical performance test on the assembled autoclave to ensure that the control system works properly.
- Conduct pressure test to check the sealing and pressure resistance of the equipment.
- Conduct sterilization effect test to ensure that the equipment can achieve the expected sterilization effect.
6. quality control:
- Carry out strict quality control inspection during the whole manufacturing process, including material inspection, machining precision inspection, welding quality inspection, etc.
- Functional and performance tests are carried out on the finished products to ensure that each piece of equipment meets the quality standards.
7. Cleaning and packaging:
- Thoroughly clean the equipment to remove oil, dust and other impurities.
- Carry out anti-rust treatment to ensure that the equipment is not damaged during transportation and storage.
- Pack the equipment ready for shipment.
The above manufacturing process enables the production of the 23 Litre Dental Sterilization Autoclave and ensures that it can safely and efficiently serve the sterilization needs of dental clinics and laboratories.
18L Dental Sterilization Autoclave Advantageous Features
As a sterilization equipment designed for dental clinics, laboratories and other small medical institutions, the 23-liter dental sterilization autoclave has the following advantageous features:
1. Compact design
- Small size, easy to use in medical institutions with limited space.
- Convenient to move, can change the use position as needed.
2. high efficiency sterilization
- Adopting high-pressure steam sterilization technology, it can effectively kill bacteria, viruses, spores and other pathogens.
- The sterilization cycle is short, usually completed within 20-30 minutes, improving work efficiency.
3. Energy saving and environmental protection
- Compared to large autoclaves, the 23-liter unit is more energy efficient, reducing power and water consumption.
- Designed with environmental requirements in mind, it reduces the impact on the environment.
4. easy operation
- Equipped with an intuitive control panel for easy operation.
- With high degree of automation, it can preset the sterilization program to reduce human operation errors.
5. safe and reliable
- With multiple safety protection devices, such as over-voltage protection, over-temperature protection, insufficient water level protection, etc., to ensure the safety of use.
- The equipment complies with national and industry safety standards.
6. Easy to maintain
- Simple structural design, easy for daily cleaning and maintenance.
- Easy replacement of wearing parts reduces the maintenance cost.
7. Wide range of application
- It is suitable for sterilizing a variety of dental instruments and materials, such as handpieces, drills, instrument trays and so on.
- It can also be used for sterilizing laboratory utensils, culture media, etc.
8. Economical and practical
- Compared to large autoclaves, the 23-liter device is more affordable and suitable for the economic budget of small and medium-sized medical institutions.
- It is less expensive to use and has a higher cost performance in the long run.
9. Precise control
- Sterilization temperature and time can be precisely controlled to ensure that the sterilization effect at the same time, reduce the damage to the instruments.
10. rapid cooling
- Some models are equipped with rapid cooling function, which can quickly cool down the temperature after the sterilization cycle, so that the instruments can be quickly removed for use.
These advantageous features of the 23-liter dental sterilizing autoclave make it an ideal choice for sterilizing instruments in dental clinics, laboratories and other small medical institutions.
18L Dental Sterilization Autoclave Application
The 18-liter dental sterilization autoclave has a wide range of applications in dental clinics, laboratories, and other small medical institutions, and the following are some specific application scenarios:
1. dental instrument sterilization:
- Used to sterilize dental handpieces, drills, turning pins, enlarging pins, instrument trays, forceps, scalpels and more.
- Ensure instruments are sterile before they are used on patients to prevent cross infection.
2. Oral surgery operations:
- Sterilizes instruments used in oral surgical procedures such as scalpels, scissors, forceps, retractors, etc.
- It is used for the preparation of preoperative instruments to ensure the safety of the surgical process.
3. Sterilization of laboratory utensils:
- Sterilize culture media, test tubes, petri dishes, pipette tips, etc. in the laboratory.
- Guarantee the accuracy and reliability of experimental results.
4. denture processing:
- Sterilize denture models, denture materials, prosthetic tools, etc. Ensure hygiene during denture processing.
- Ensure hygiene and sterility in the process of denture processing. 5.
5. Sterilization supply room:
- As one of the core equipment in the sterilization supply room, it is used for batch sterilization of daily instruments.
- Maintains the recycling and supply of instruments within the healthcare organization.
6. Dental Material Sterilization:
- Used for sterilization of dental materials such as composite resins, bonding agents, impression materials, etc.
- Prevents contamination of materials prior to use.
7. Emergency rapid sterilization:
- Rapid provision of sterile instruments during emergency surgery or emergencies.
- Improve the emergency response capability of medical institutions.
8. Sterilization needs of small medical institutions:
- Suitable for community clinics, dental clinics, beauty clinics and other small medical institutions.
- Easy to use in limited space due to compact size.
9. teaching and research institutions:
- Used for teaching and research activities in medical schools, dental schools and research institutions.
- Provides a sterile laboratory environment to guarantee the quality of teaching and research.
10. personal studio:
- Sterilizes instruments in the dentist's or dental technician's personal studio.
- Suitable for the economic and space needs of independent practitioners or small studios.
If you are looking for a high-quality metal dental sterilization autoclave, get in touch with us today. Our products are carefully crafted from high-grade stainless steel, such as 304 or 316 stainless steel, for superior corrosion resistance and mechanical stability, which ensures that your dental sterilization process is more efficient and safer. Whether you are a family dental clinic, a chain of dental institutions or a large hospital, we can provide you with professional and reliable sterilization solutions and comprehensive after-sales service. Contact us today to experience our high-quality metal dental sterilizing autoclave for more thorough sterilization and longer durability of your medical devices.
Q1: What metal products does your company mainly produce?
A: Our company specializes in custom stretched metal products, including but not limited to metal tubing, metal rods, and special-shaped materials.
Q2: What is the process for custom products?
A: Customer provides product requirements or drawings -> Technical assessment and quotation -> Order confirmation -> Design and production -> Quality inspection -> Shipment
Q3: How does your company ensure product quality?
A: We have a strict quality management system in place. All products are inspected multiple times during production to ensure they meet national standards and customer requirements.
Q4: What is the typical delivery time for an order?
A: The delivery time depends on the complexity of the product and the order quantity, typically ranging from 15 to 45 working days.
Q5: How can we contact you for custom inquiries?
A: You can reach us by phone, email, or online customer service. We will provide you with prompt service.
Q6: Do your products meet international standards?
A: Our products are produced in strict accordance with international standards and have passed relevant certifications, such as ISO 9001 Quality Management System certification.
Q7: How is logistics and transportation arranged for the products?
A: We can arrange logistics and transportation according to the customer's requirements, including air freight, sea freight, or land transportation, and ensure the products are delivered safely and on time.
