Product
Product
Supplier
Search
Get Quote
730 people are quoting
Product introduction
DIN41612-High current range
DIN 41612 connectors for interconnection in all 19in Eurocard racking systems. Connectors are compatible with RS 19in sub-rack systems. Typical applications include telecommunications, data communications, measurement and control. Connection between plug-in cards at right angle to backplane wiring. Connection between two parallel PCB's arranged one above the other. For front or rear I/O.
DIN41612 Right Plug H15 Type High Power Connectors 15 Positions Specification
Current Rating: 15Amp
Insulation Resistance: 1000MΩ min.at DC 500V
Contact Resistance: 8mΩ max
Withstand Voltage: AC 3100V For 1 Minute
Operating Temperature: -55°C to +105°C
Contact Material: Phosphor Brass
Contact Plating: Au or Sn Over Ni
Insulator Material: PBT+30%GF UL 94V-0
Insertion Force: 90N max.
Withdrawal Force: 0.2N min.per individual contact
Right Plug H15 Type High Power Connectors 15 Positions
ATKCONN Eurocard Connectors
The Eurocard line is available in board-to-board, wire-to-board,
ribbon cable-to-board and high current connectors.
APPLICATIONS
• Data centers
• Storage
• Servers
• Base stations
• Telecommunications equipment
• Backplane and motherboard assemblies
• Switching systems
• Modular rack systems
• Power automation
• Distributed control systems in
industrial control
• Programmable logic controllers (PLC)
• Robotics
• Test and lab equipment
• Energy distribution
• Monitoring equipment
What is DIN 41612
DIN 41612 was a DIN standard for electrical connectors that are widely used in rack based electrical systems. Standardisation of the connectors is a pre-requisite for open systems, where users expect components from different suppliers to operate together. The most widely known use of DIN 41612 connectors is in the VMEbus and NuBus systems. The standard has withdrawn in favor of international standards IEC 60603-2 and EN 60603-2.
DIN 41612 connectors are used in Pancon, STEbus,Futurebus, VMEbus, Multibus II, NuBus, VXI Bus,eurocard TRAM motherboards,and Europe Card Bus, all of which typically use male DIN 41612 connectors on Eurocards plugged into female DIN 41612 on the backplane in a 19-inch rack chassis.
The DIN41612 connector is classified according to the standard of the connector. There are two different IEC standards that can be used, namely IEC 60-603 and IEC 61 076-4 113. Each provides slightly different test conditions, but in both cases, Class 1 or Level 1 provide the highest quality and reliability. They are obviously are more expensive, and this is mainly as a result of the thicker gold plating on the contacts.
Before the product is launched, the 3D model is simulated and optimized by simulation software such as ABAQUS to ensure that my accuracy and safety are in the best state. The rubber core is composed of high-performance engineering plastics, with smooth surface, strong insulation, high flame retardant grade, and more reliable wiring. The contact parts are made of copper alloy material, which has stable transmission and strong conductivity. The contact area is gold-plated, and the pin area is tin-plated, which is corrosion-resistant and rust-resistant, durable, and reliable in connection. The improved double-barb fixing structure ensures that the contact body is firmly clamped and not loose.
The positioning accuracy can ensure that the connector is accurately connected when the circuit board is loaded into the chassis; the installation firmness is used to ensure that the connector does not fall off or shift when the circuit board is unplugged and inserted, so as to ensure the repeatability of unplugging; replaceability is used for When the flat upper part of the same chassis needs to be disassembled or replaced, it can be operated conveniently and quickly.
ATKCONN ELECTRONICS CO.,LTD
Main Product Range: Connectors丨Wire Harness丨Board to Board Connector丨Wire to Board Connector丨Battery Holders丨Industrial Connector
FAQ
Q: Can you do OEM and ODM?
A: Yes, OEM and ODM are both acceptable. The material, color, style can customize, the basic quantity we will advise after we discuss.
we can support ODM and OEM service here, we have strong R&D team in Antenk group.
Q: Can you do our own packaging?
A: Yes, you just provide the package design and we will produce what you want.
Q:How can we get a quote?
A:Contact us by email or online connection with specification: such as material, design, size, shape, color, quantity, surface finishing, etc.
Q: Do you provide sample ? Is it free? A: If the sample is low value, we will provide the free sample with freight collect. But for some high value samples, we need to collect the sample charge.
If you are interested in the product, contact 2bvideo.com for more information for more information
The information of 2bvideo.com limited shown above is provided by the user or collected on the network. Video 2B does not guarantee the authenticity,accuracy and legitimacy of 2bvideo.com limited information. Video 2B does not involve legal relationships and disputes between users arising from transactions other than secured transactions on this website. Disputes shall be settled by you through negotiation. If you are the person in charge or relevant employee of this enterprise, if you find that the enterprise information is incorrect or want to manage thiscompany, please contact us jacklee1558@gmail.com, after you claim the enterprise, you can obtain management permission, publish supplyand demand information, bring consulting orders, and remove page advertisements.
Main Product:
Connectors ,
Wire harness,
Board to board connector ,
Wire to board connector ,
Battery holders ,
Industrial connector
