Product
Product
Supplier
Search
Get Quote
730 people are quoting
HONY®Ultem PEI GF30 Sheet It is a material made of glass fiber reinforced and modified with PEI as the base material. It has higher mechanical strength and rigidity than pure PEI, and better dimensional stability. The addition of glass fiber, carbon fiber or other fillers can achieve the purpose of enhancement and modification. The high torsional strength of plastics makes it a cheap substitute for small steel cutting parts
Ultem Pei 1000 Sheet Product features: excellent dimensional stability, creep resistance, flame retardant, low smoke, high temperature resistance, radiation resistance, and high mechanical properties.
Scope of application: electrical and electronic, aviation parts, mechanical processing, automotive industry, medical equipment, food industry, etc.
Pei Ultem Sheet Rod Applications: Miniature relay housings, circuit boards, coils, flexible circuits, reflectors, high-precision dense optical fiber components, aircraft nose parts, handles of medical surgical instruments, trays, fixtures, prostheses, medical light reflectors, dental appliances, etc.
1. The introduction of PEI
Ultem® PolyEtherImide (PEI) is an amber transparent high performance polymer which
combines high strength and rigidity at elevated temperatures with long term heat resistance.
Ultem® offers excellent dimensional stability combined with broad chemical resistance.
2. The Ultem PEI Grades
(1) Ultem® 1000 (unfilled)
(2) Ultem® 2300(30% glass filled)
(3) Ultem® 2100(10% glass filled)
(4) Ultem® 2200(20% glass filled)
3. The Applications of Ultem PEI sheet&rod
(1) Coil Bobbins, Insulating bushes.
(2) Components subject to repeated cleaning and sterilization.
(3)Water-pump impeller, expansion valves.
(4) Hot water reservoirs and heat exchange systems.
Standard sizes:Dia 5-100mm Length: 0.2m 0.5m 1m 1.2m 1.5m 2m
| HONYPEI GF30 Technical Data Sheet |
|
|
|
| Property item | Testing method | Unit | Testing data |
|
Mechanical properties |
|||
| Density | ASTM D792 | g/cm3 | 1.51 |
|
Tensile strength at yield |
ASTM D638 | Mpa | 230 |
|
Elongation at break |
ASTM D638 | % | 20 |
|
Bending strength |
ASTM 790 | Mpa | 260 |
|
Flexural modulus |
ASTM 790 | Mpa | 4500 |
|
Shore Hardness |
ASTM D2240 | D | 95 |
|
Impact strength |
ASTM D256 | J/M | 50 |
|
Thermal performance |
|||
|
Melting point |
DSC | ℃ | - |
|
Heat distortion temperature |
ASTM D648 | ℃ | - |
|
Long-term working temperature |
- | ℃ | - |
|
Short-term working temperature |
- | ℃ | - |
|
Thermal conductivity |
DIN 52612-1 | W/(K-M) | - |
|
Coefficient of linear expansion |
ASTM D696 | 10-5-1/K | - |
|
Electrical properties |
|||
|
Dielectric strength |
ASTM D150 | KV-mm | - |
|
Dielectric loss coefficient |
ASTM D150 | - | - |
|
Volume resistance |
ASTM D257 | Ω.cm |
1016
|
|
Surface resistance |
ASTM D257 | Ω | 1016 |
|
Dielectric constant |
ASTM D149 | - | - |
|
Chemical properties |
|||
|
Balanced water absorption |
23℃ 60%RH | % | 0.16 |
|
Acid resistance |
23℃ 60%RH |
|
+ |
|
Alkali resistance |
|
|
+ |
|
Acid and alkali water resistance |
|
|
+ |
|
Chloric acid and alkali resistance |
|
|
+ |
|
Resistant to aromatic compounds |
|
|
+ |
|
Copper resistance |
23℃ 60%RH |
|
- |
|
Hot water resistance |
23℃ 60%RH |
|
+ |
|
Other properties |
|||
|
Combustibility |
UL 94 |
|
HB |
|
Stickiness |
|
|
+ |
|
toxic free and safe |
EEC 90/128 FDA |
|
- |
|
Coefficient of friction |
DIN 53375 |
|
0.5 |
|
anti-UV |
- |
|
- |
Remark:
1."+" Tolerable , “-”Intolerable , "0" Depends on the situation
2. The above data is obtained from raw material test data, which is not completely consistent with the performance of the finished product, and the uniqueness of the data is not guaranteed
Mainproduction
Certificate
Package
FAQ
Q1: How can I get a sample?
A1: Small size of sample are free, you only need pay for the shipping cost, or you can provide your UPS, DHL, Fedex, TNT courier to us. Customized size of sample should be charged.
Q2: What is your payment term?
A2: Small order ,we accept by T/T,western union, paypal, .Bulk quantity order ,30% T/T in advance, 70% balance before shipment. Other terms negotiable.
Q3:Can we purchase a small part of plastic sheet / rod?
A3: Yes,you can, if we have the size you require in stock.
Q4:Can you manufacture the plastics products as per drawing?
A4: Yes,we can.
Q5:What kinds of processing machine do you have?
A5: CNC machining center,CNC lathes,Milling,Laser engraving machine.
If you are interested in the product, contact 2bvideo.com for more information for more information
The information of 2bvideo.com limited shown above is provided by the user or collected on the network. Video 2B does not guarantee the authenticity,accuracy and legitimacy of 2bvideo.com limited information. Video 2B does not involve legal relationships and disputes between users arising from transactions other than secured transactions on this website. Disputes shall be settled by you through negotiation. If you are the person in charge or relevant employee of this enterprise, if you find that the enterprise information is incorrect or want to manage thiscompany, please contact us jacklee1558@gmail.com, after you claim the enterprise, you can obtain management permission, publish supplyand demand information, bring consulting orders, and remove page advertisements.
Main Product:
Plastics Sheet,
Plastics Rod,
CNC Plastic Machined Parts,
CNC Metal Machined Parts ,
Plastics Injection Molding,
Antistatic Material
