Production Description

Product Parameter

Main Specification	Unit	Parameter
Capacity	Ton	45
Stroke	mm	20	25	30	40
Stroke Per Minute	S.P.M	200-1000	200-900	200-800	200-700
Die-Hight	mm	223-258	220-255	218-253	213-248
Slide Adjustment	mm	35
Slide Area	mm	750*360
Bolster Area	mm	750550120
Bed Opening	mm	580*120
Main Motor	HP	15
Transfer Mold Motor	HP	1/4
Lubricating System		Forced Lubrication's system and Cooling machine
Avoid Shake System		SAHA Prevent Quake Foot
Presses Dimension	mm	131018202450
Presses Precision		GB(JIS) 1 Class

Product Advantages

1.Advanced industrial design ideas, low noise, low consumption, and good saving energy.

2. Adoption of high-strength cast iron, which's more resistant to minimal vibration, ensuring stamping accuracy and the service long-life.

3. Microcomputer controls system and few peripheral electrical elements with high stability. Operator can disassemble the board of the press, which is easy for maintenance.

4. Hydraulic overload protector with clutch brake is equiped as a standard feature to cause emergency stop instantly , that can greatly ensure maximum protection for the press and die.

5. Using oil lubracation system introduced MPA from USA, which's fully ensuring the high-speed lubrication requirements,reduce oil leakage of the press and remain the cleaness of the press.

6. American MAC low voltage solenoid valve, low temperature rise, low noise, speed accurate to 12000 times per minute.

7. Adopt Air filtrate system from Taiwan Duplex pieces, the water in the air filter out, to ensure that the gas parts of the press dry and prolong the life.

Punch Press H-Frame 45t Punching Press High-Performance Stamping Presses Mechanical Punch Press Air Conditioning Heat Sink Punching High Speed Power Press

Punch Press H-Frame 45t Punching Press High-Performance Stamping Presses Mechanical Punch Press Air Conditioning Heat Sink Punching High Speed Power Press

Where places is suitable for applicating of the heat sink stamping parts?

1.Computer fileds: computer mainboard, PC, IPC, Server, PCTV, Router, Power supply (CPU cooler, VGA cooler, Cooling fan).

2. Machines: Industry/Medical/Auto Spare Parts/Household Appliances etc.

3. LED lighting: stage light, high bay light, down light, street light, automobile lamp ,etc.

4. Security fields: security cameras, infrared light cameras.

5. Home appliances: pico projector, electronic refrigerator, red wine cooler, LASER TV, LCD TV, LED panel, Sound, Air condition, induction cooker, etc.
Punch Press H-Frame 45t Punching Press High-Performance Stamping Presses Mechanical Punch Press Air Conditioning Heat Sink Punching High Speed Power Press

Notice of production:

In addition to choosing a high manufacturing accuracy, an reasonable die structure, good heat treatment effect and correct selection of die accuracy, correcting use,maintenance of die are also pretty important links.

The following points here should be paid more attention to:

1. The most importing thing is strict and correct using the die equipment.

2. Checking the rotating disc and the mounting base of the die on aa regular basis to guarantee the coaxial accuracy of the upper and lower rotating discs.

3. After the die install, pls remember to check whether the fastening screw of the installation base of the die is locked correctly.

4. If the edge of punch and concave die is worn out, it's ought to stop using and grind in time. Otherwise, the wear degree of the die edge will be expanded rapidly, the wear of the die will be accelerated, and the quality of the high speed stamping machine and the life of the die will be reduced.

5. The mould should be put back to the designated position in time after using, and be treated with oil and rust-proof immediately.

6. To guarantee the service life of the die, the spring of the die should be replaced regularly, which can greatly to prevent the fatigue damage of the spring from affecting the use of the die.

7. Last but not least, no matter whether you use any dies or not at that time, please kindly ensure your own safety.
Punch Press H-Frame 45t Punching Press High-Performance Stamping Presses Mechanical Punch Press Air Conditioning Heat Sink Punching High Speed Power Press

Q1:Are you a trading company or manufacturer?
A1: We are a manufacturer more than 17 years.

Q2:Can you help me solve a whole stamping line?
A2: Yes, please provide the product drawings, and then we'll give you a best project.

Q3:How long does the general lead time take?
A3:All machines need to be arranged for production, which shall be determined to the situation at that time.

Punch Press H-Frame 45t Punching Press High-Performance Stamping Presses Mechanical Punch Press Air Conditioning Heat Sink Punching High Speed Power Press