Product
Product
Supplier
Search
Get Quote
730 people are quoting
Equipment composition for wire drawing machine LZ8/400
(1) Ф800mm spool pay off machine
(2) LZ8/400 straight line wire drawing machine
(3) tension device
(4)degreasing machine: water circulation+machinery scrubbing+sprinkling+high pressure blowing
(5) Ф630mm spool take up machine
(6) man-machine interface control touch screen
(7)complete set electricity control cabinet
3. main technical parameter and points for wire drawing machine
(1) Maximum enter-wire strength: ≤1000Mpa
(2) Maximum enter-wire diameter: Ф2.6mm
(3) Minimum enter-wire diameter: Ф0.8/1.2/2.0mm(or other finished MIG wire)
(4) Maximum compression rate: 85%
(5) Maximum drawing speed: 20 m/s Normal speed:15-18m/s(Capacity:0.5T/H)
(6) Water consumption and pressure: 5m3/h Water pressure≥0.2Mpa
(7) Gas consumption and air pressure: 1.0m3/h Air pressure≥0.6Mpa
(8) Motor: drawing machine and take up machine all adopt 11KW 50HZ AC frequency conversion motor
(9) Reel: ①reel diameter: Ф400mm
②reel material: ZG45-55 steel, spray tungsten carbide hard alloy powder on the working surface, hardness is above HRC60, brightness≤0.4Ra, it is made by Zhengzhou Dayang Thermal Sprayed Company
③ Reel useful life: more than two years, replace freely when wear and tear within two years
④Reel cooling way: using slit-type water cooling inside.
(10) Die box for wire drawing machine(this machine including pay off machine and take up machine)
① the die box body using welding parts,spray tungsten carbide on guide wheel or guide roll surface.
② die box divided into two kinds Lubrication powder cavity and cooling water cavity(flow water cooling or indirectly cooling)
③ the direction of die box can be adjusted.
(11) Tuning roller:
① Using Pneumatic anti-tension tuning,the tension is adjustable; guide pulley are sprayed with WC, useful life is more than two years. Sensor adopt angular displacement non-contact way, TURCK sensor imported from Germany, make the process of template matching wider, mould can be automatically compensated after wear and tear, and it is difficult to break line.
②using single control device which is originated in domestic, make sure that the swing when tuning roller is running is not related to the direction of mould entering wire, constant wire entering angle can: 〈1〉make sure useful life of mould prolong more than 20%〈2〉make sure stable roundness when drawing;〈3〉make sure fine stable linearity when drawing
We can make layer winding machine,flux cored wire drawing machine,drum packing machine and so on.
If you are interested in the product, contact 2bvideo.com for more information for more information
The information of 2bvideo.com limited shown above is provided by the user or collected on the network. Video 2B does not guarantee the authenticity,accuracy and legitimacy of 2bvideo.com limited information. Video 2B does not involve legal relationships and disputes between users arising from transactions other than secured transactions on this website. Disputes shall be settled by you through negotiation. If you are the person in charge or relevant employee of this enterprise, if you find that the enterprise information is incorrect or want to manage thiscompany, please contact us jacklee1558@gmail.com, after you claim the enterprise, you can obtain management permission, publish supplyand demand information, bring consulting orders, and remove page advertisements.
Main Product:
Wire Drawing Machine ,
Flux Cored Wire Forming Machine ,
Layer Winding Machine ,
Mig Welding Wire Production Machine ,
pay off and take up machinery ,
drum packing machine
