Product
Product
Supplier
Search
Get Quote
730 people are quoting
MVR Rising Film Evaporator for Pulp,Sanitary Falling Film Evaporator for Pharmaceutical Excipient,MVR Rising Film Evaporator for Chemical Solvent Recovery,Salt Dewatering Mvr Evaporator Enthalpy Increased High Temperature Condensate,MVR Falling Film Evaporator for sodium chloride
MVR rising film evaporator:
After preheating, the raw material liquid enters the evaporator from the bottom, and the heated steam condenses outside the pipe. After being heated, the solution rapidly vaporizes, and the generated secondary steam rises at a high speed inside the tube, pulling the feed liquid against the inner wall of the tube into a thin film and allowing it to continue to evaporate. The vapor liquid is separated in the top separator. The compressor compresses the secondary steam and sends it as heating steam to the shell side of the heat exchanger for use as a heat source in the evaporator. Realize continuous evaporation process.
MVR falling film evaporator:
1. High heat exchange efficiency;
2. Small footprint;
3. The material stays for a short period of time, which is not easy to cause material deterioration;
4. Suitable for materials with higher viscosity.
MVR is the abbreviation for Mechanical Vapor Compression. Nickname: Mechanical steam recompression evaporator is a type of evaporator that utilizes the secondary steam generated in the evaporator. After being compressed by the compressor, the pressure and temperature increase, and the enthalpy increases. It is then sent to the heating chamber of the evaporator for circulation as heating steam. MVR is a technology that reuses the heat generated by its own secondary steam to reduce the demand for external energy.Type of MVR evaporator:MVR falling film evaporator, MVR rising film evaporator, MVR forced circulation evaporator, etc. When the thin secondary steam is compressed by volume, its temperature will increase accordingly, achieving the transformation of low-temperature and low-pressure steam into high-temperature and high-pressure steam, which can serve as a heat source to reheat the raw liquid that needs to be evaporated, thus achieving the goal of recycling and utilizing steam; Due to the fact that the compression of this volume is achieved through a compressor, it is called MVR. Currently, MVR evaporators are increasingly being used in areas with higher steam prices and lower electricity prices. The larger the evaporation capacity, the more advantageous it is for MVR.
If you are interested in the product, contact 2bvideo.com for more information for more information
The information of 2bvideo.com limited shown above is provided by the user or collected on the network. Video 2B does not guarantee the authenticity,accuracy and legitimacy of 2bvideo.com limited information. Video 2B does not involve legal relationships and disputes between users arising from transactions other than secured transactions on this website. Disputes shall be settled by you through negotiation. If you are the person in charge or relevant employee of this enterprise, if you find that the enterprise information is incorrect or want to manage thiscompany, please contact us jacklee1558@gmail.com, after you claim the enterprise, you can obtain management permission, publish supplyand demand information, bring consulting orders, and remove page advertisements.
Main Product:
MVR evaporator,
Low temperature evaporator ,
Sludge dryer,
wastewater evaporator,
Power plant wastewater treatment,
spray dryer
