1. moderate capacity: the 2.25 gallon capacity is designed to fit into homes and small commercial environments without taking up too much space, while still meeting daily water needs.
2. Gravity Drive: utilizing the principle of gravity, the water naturally flows down through the filter layer without the need for electricity, energy saving and environmentally friendly.
3. Stainless steel material: made of stainless steel material, corrosion-resistant, not easy to rust, extending the service life of the equipment.
4. Modular design: the filter adopts modular design, which is easy to replace and maintain the filter elements.
5. sealing performance: good sealing performance ensures that the water quality during the filtration process is free from external pollution.
1. stainless steel housing: the housing is made of stainless steel, which is sturdy and durable while providing an elegant appearance.
2. Filter Basket/Bucket: Located at the upper part of the filter, it is used for placing filter media, such as activated carbon, quartz sand, etc.
3. Stainless Steel Dispenser: Located below the filter basket, it is responsible for evenly distributing water into the filter media to improve filtration efficiency.
4. Filtering media: different types of filtering materials, such as activated carbon, PP cotton, ceramic balls, etc., can be used to remove different pollutants according to the needs.
5. Water storage tank: The filtered clean water is stored in the tank for subsequent use.
6. Outlet faucet: Located under the water storage tank, it is convenient for users to access the filtered water.
7. water inlet and drain: the water inlet is connected to the water source, and the drain is used for discharging filtered wastewater or rinsing.
8. Dustproof cover: protects the filter basket from dust and debris.
These design features and components of the 2.25 gallon gravity filter work together to ensure efficient operation of the equipment and convenient use for the user.
The manufacturing process for 2.25 gallon gravity filters typically involves the following steps, which ensure quality, durability and filtration efficiency:
1. Material Preparation:
- Select suitable stainless steel material, usually food grade stainless steel, to ensure safety and corrosion resistance.
- Prepare filter media, such as activated carbon, PP cotton, quartz sand, etc. These materials need to be pre-treated, e.g., cleaned and sterilized.
2. Cutting and molding:
- Use laser cutting or mechanical cutting technology to cut the stainless steel sheet into the required shape and size.
- The cut stainless steel sheets are processed into housings, distributors and other components by bending, folding and other forming processes.
3. Welding:
- Precision welding techniques, such as argon arc welding, are used to weld the stainless steel components together to ensure that the seams are uniform, strong and well sealed.
- After the welding is completed, the weld seams are polished to make them smooth and even to avoid scratches and dirt hiding.
4. surface treatment:
- Polish the surface of stainless steel to improve the quality of appearance and corrosion resistance.
- Optional surface treatments also include electrolytic polishing, painting or coating to enhance durability and aesthetics.
5. Assembly:
- Assemble welded and surface finished stainless steel housing with internal components.
- Installs components such as filter baskets, dispensers, and outlet faucets and ensures precise fit between them.
6. Seal Installation:
- Install seals such as O-rings, gaskets, etc. to ensure that the filter will not leak during operation.
7. Quality inspection:
- Perform pressure test on the assembled filter to ensure no leakage.
- Check the structural integrity and appearance quality of the filter to ensure compliance with the manufacturing standards.
8. Packing:
- Clean and package the inspected gravity filters ready for shipment.
Throughout the manufacturing process, the following are some key points:
- Quality Control: Strict quality control is performed at each step to ensure the performance and safety of the final product.
- Environmental control: During the manufacturing process, especially in the welding and surface treatment stages, the working environment needs to be controlled to avoid contamination and damage.
- Safety standards: The manufacturing process needs to comply with relevant safety standards and regulations to ensure that the products are harmless to human beings and the environment.
Through the above process, 2.25 gallon gravity filters are manufactured efficiently and accurately and are able to provide long term filtration service in both domestic and commercial environments.
The 2.25 gallon gravity filter is a water treatment device commonly used in homes and small commercial environments that offers the following advantageous features:
1. no electricity required:
- Gravity filters do not rely on electricity to operate, relying on the natural gravity flow of water for filtration, making them suitable for use in locations without power.
2. environmentally friendly and energy saving:
- Since it does not require electricity, it helps save energy and reduce carbon emissions.
3. Simple maintenance:
- Gravity filters have a simple structure, and cartridge replacement and maintenance operations are usually easy and do not require specialized skills.
4. Affordable:
- Compared with other types of water filtration systems, gravity filters are less expensive to purchase and operate.
5. Multi-stage filtration:
- Usually contains multiple filtration layers, such as activated carbon, PP cotton, quartz sand, etc., which can effectively remove impurities, chlorine, organics, odor and color from water.
6. Water quality improvement:
- It can provide better tasting and cleaner water, which helps to improve the quality of life.
7. Moderate Capacity:
- The 2.25 gallon capacity is suitable for small home or office use and does not require frequent refilling and filter replacement.
8. Portability:
- Lightweight design, easy to move and carry, suitable for camping, traveling or emergency water purification.
9. Wide applicability:
- Can treat a variety of water sources, such as tap water, well water or rainwater, for different water quality conditions.
10. Health benefits:
- By removing harmful substances, gravity filters help protect the health of users and reduce the risk of diseases caused by unclean drinking water.
11. Durability:
- Made of food-grade stainless steel or other high-quality materials, it is corrosion-resistant and has a long service life.
12. Small space occupation:
- Compact design, does not take up too much space, suitable for placement in the kitchen countertop, office corners or other narrow space.
13. Quiet operation:
- Since no pump or motor is used, the gravity filter is virtually noiseless during operation.
