GFM1200-A Laminating machine

GFM1200-A Laminating machine

10 month ago

0 0

Anhui Innovo Bochen Machinery Manufacturing Co., Ltd.

 16 year year

Product details

1. Product description

1.1 Function:

The paper can be laminated with paperboard to increase the strength and thickness of the material or special effects. After the die-cutting, it can be used for packaging boxes, billboards and other purposes.

1.2 Structure:

A. Upper Paper Feeder: It can send stacks of 120-800gsm paper from above.

B. Bottom feed: It can send 0.5~10mm paperboard from below.

C. Gluing mechanism: The glued water can be applied to the fed paper.

D. Regulatory organization - Fits the two papers according to the set tolerances.

E. Pressurizing Conveyor... Presses the attached paper and conveys it to the delivery section.

1.3 Principles:

The top paper is sent out by the upper paper feeder and sent to the start detector of the positioning mechanism for detection. Then the bottom paper is sent out; after the bottom paper is coated with glue on the glue wheel, the top paper and the bottom paper are respectively conveyed to the paper Synchronous detectors on both sides, after the detection, the controller calculates the error value of the paper and the bottom paper, and the servo compensation device on both sides of the paper compensates the paper to a predetermined position for splicing, and then pressurizes the conveying. The machine presses the paper and conveys it to the delivery machine to collect the finished product.

1.4 applicable materials:

Paste paper --- 120 ~ 800g/m thin paper, cardboard.

Bottom paper---0.5~10m/m paperboard, single-sided cardboard, multi-layer corrugated paper, pearl board, honeycomb board, styrofoam board.

Glue - resin, etc., PH value between 6 ~ 8, can be applied to the glue.

Structural features:

Adopting the world's leading transmission control system, only need to input paper size system auto-tuning.

Computerized high-speed fitting, up to 150m/min.

Chuanliu-type air supply head, with four sets of forward nozzles and four sets of suction nozzles.Feed Block adopts low stack cardboard, which can fit the paper to the pallet, and can install track-assisted pre-stacker Use multiple sets of electric eyes to know the advance position of the bottom line, and make the servo motor on both sides of the face paper to independently rotate to compensate the upper and lower paper alignment, which is accurate and smooth.

Full-function electronic control system, using human-machine interface and PLC program model display, can automatically detect operating conditions and work records.

Automatic glue replenishment system can automatically compensate for lost glue and cooperate with glue recycling.

SPECIFICATION：

MODEL	GFM1200-A	GFM1500-A	GFM1700-A	GFM1900-A	GFM2200-A
Max Sheet(mm)	*12001200**	*15001500**	1700*1700	*19001900**	*22002100mm**
Min Sheet(mm)	380×400	380×400	400×450	*450450**	*500500mm**
Top Paper Thickness	120-800g	120-800g	120-800g	120-800gsm	120-800gsm
Max Speed	150m/min	150m/min	150m/min	150m/min	150m/min
Fitting Precision	±1-1.5mm	±1-1.5mm	±1-1.5mm	±1-1.5mm	±1-1.5mm
Machine Power	20KW	20KW	22KW	25KW	28KW
Bottom Paper Thickness	300gsm-10mm Corrugated board and cardboard	300gsm-10mm Corrugated board and cardboard	300gsm-10mm Corrugated board and cardboard	300gsm-10mm Corrugated board and cardboard	300gsm-10mm Corrugated board and cardboard

BRANCH INTRODUCTION：
1. BOTTOM PAPER FEEDING

Use imported Servo motor electric controlling system, with Japan NITTA suction
belt to make suction power inverter, and belt cleaned by water roller; Patented
technology to ensure corrugate and cardboard goes out smoothly and simple operation.

2. TOP SHEET FEEDING MECHANISM
Both paper lifting and feeding nozzle of high speed auto dedicated feedr can be freely adjusted to be adapted to both thin and thick paper. Together with Becker pump. Ensure top feeding paper run fast and smoothly.

3. ELECTRICAL SYSTEM
Designed in the accordance with European CE requirement, ensure machine stability, high efficiency and low failure. Using man-machine interface and PLC combination, display all the information, such as warning, error detect, failures, and operating speed, etc on the screen at a glance.

4. PRE-STACK PART
Pre-pile system with preset function can be set as paper size through touch screen and oriented automatically to reduce set-up time efficiently.

5.TRANSMISSION SYSTEM

Gates synchronous belt together with NSK or SKF bearing as main transmission is adopted to ensure stability. When change bottom sheet thickness, the rollers pressure can be controlled by servo motor quickly. Meanwhile, machine also equips handle with mechanical encoder.

6. POSITIONING SYSTEM & GLUE ROLLER

The use of multiple sets of photoelectric sensor at bottom sheets relative position,
control top sheets on both sides of the servo motor to do independent compensation action, so that accurate positioning of top paper and the bottom paper.
Stainless steel roller, never rust, after narrowly grinding, guaranteed the minimum amount glue coated evenly. Down roller be cleaned by water roller.

7. TOUCH SCREEN OPERATION SYSTEM

It adopts the centralized control of the touch screen, realizes the man-machine dialogue with the high-resolution man-machine interface, and realizes the real-time dynamic monitoring of operation and fault, making it more convenient to adjust and troubleshoot

8. AUTOMATIC LUBRICATION SYSTEM

Lubricate the bearing regularly to prolong the service life of the bearing

LEADING EDGE FEEDING SYSTEM(OPTIONOL)

This system is for option, more suitable for large size and thick bottom sheets.

BIG SUCTION SYSTEM FOR BOTTOM PAPER（OPTIONAL）

This system is for option, if your products with cardboard, corrugated board, and 3 or 5 layers. you can choose this system.

Some parts list

Serial	Part	Country	Brand
1	Main motor	Germany	Siemens
2	Motion controller	China	Innovo self design
3	Main Servo (Yaskawa with transformer)	Japan China	Yaskawa Verchi
4	PLC	Germany	Siemens
5	Vacuum pressure pump	Germany	Becker
6	Frequency converter	Germany	Siemens
7	Front Gauge servo	Japan	Yaskawa
8	Encoder	Japan	Omron
9	Press motor	Taiwan	CPG
10	Main engine width modulation motor	Taiwan	CPG
11	Feeding width motor	Taiwan	CPG
12	Feeding motor	Taiwan	Liming
13	Paper speed reducer	Taiwan	Liming
14	Chain	China	Japan options
15	Relay	Japan	Omron
16	Optoelectronic switch	Taiwan	FOTEK
17	solid-state relay	Taiwan	FOTEK
18	Promixity switches	Japan	Omron
19	water level relay	Taiwan	FOTEK
20	Contactor	France	Schneider
21	Linear guide slide and guide rail	Taiwan	HIWIN
22	Potentiometer	Japan	TOCOS
23	Button	France	Schneider
24	Brake resistor	Taiwan	TAYEE
25	Touch screen	Taiwan	WEINVIEW
26	Air switch	France	Schneider
27	Thermorelay	France	Schneider
28	DC power system	Taiwan	Mingwei