Product
Product
Supplier
Search
Get Quote
730 people are quoting
flux cored wire drawing machine line
1-Strip rewinding machine
2-Forming and rough drawing machine
3-Fine wire drawing machine
4-Layer winding machine or drum packing machine
5-The assisting machines:butt welding machine and pointing machine.
3.1 Main working principle:FD1600 vertical passive pay-off machine machine: Place the steel belt cut and coiled in the last process on the vertical passive pay-off machine by driving or a special sling. At this moment, the expansion sleeve is in an expansion & tension state. Put the steel belt in the expansion sleeve. Then use a special spanner to loosen the expansion sleeve to cause the expansion sleeve to tightly enclose the steel belt. GZL00 Support rack: Pull out the steel belt from the vertical passive pay-off machine, and allow it to enter the second group of horizontal guide rollers by way of the first group of horizontal guide rollers.
SD800 Spool take up machine: The steel belt from the roller support is pulled through the well-shaped guide roller and wire-pressing guide roller, and then it is wrapped around the spool. At this moment, start the device, gradually from a low speed to a normal working state. Use the tension arm to control the pay-off speed.
3.2 Steel belt ultrasonic online cleaning machine
2. Equipment composition: ultrasonic cleaning tank, bubbling hot rinsing tank, circulating hot air drying box, 2 circulating filtration systems, sewage system, 2 sets of liquid cutting mechanisms, electric control system, door panel frame, bottom guide wheel lifting mechanism, guide roller And pressure rollers and other components.
3. Cleaning medium: water-based cleaning agent.
4. Running direction; 1 set for left feed, 1 set for right feed
5. Cleaning process: guide wheel in → ultrasonic cleaning → bubbling hot rinsing → hot air drying → guide wheel out.
6. Machine parameters:
(1) Approximate appearance of the whole machine: 4300*1030*1200 (L*W*H) mm.
(2) Ultrasonic power: a total of 6.24KW. (4 pieces of vibration box)
(3) Heating power: 18KW (water) + 6KW (air).
(4) Bubbling air pump: 0.55KW (one set)
(5) Ultrasonic circulating pump: 370W CM2-20 (two sets)
(6) Conveying speed: 100--130m/min
(7) Total power consumption: pmax≈32KW.
(8) Power supply voltage: 3￠AC380V±10% 50HZ.
If you are interested in the product, contact 2bvideo.com for more information for more information
The information of 2bvideo.com limited shown above is provided by the user or collected on the network. Video 2B does not guarantee the authenticity,accuracy and legitimacy of 2bvideo.com limited information. Video 2B does not involve legal relationships and disputes between users arising from transactions other than secured transactions on this website. Disputes shall be settled by you through negotiation. If you are the person in charge or relevant employee of this enterprise, if you find that the enterprise information is incorrect or want to manage thiscompany, please contact us jacklee1558@gmail.com, after you claim the enterprise, you can obtain management permission, publish supplyand demand information, bring consulting orders, and remove page advertisements.
Main Product:
Wire Drawing Machine ,
Flux Cored Wire Forming Machine ,
Layer Winding Machine ,
Mig Welding Wire Production Machine ,
pay off and take up machinery ,
drum packing machine
