Piezo scaler PS-30 video

3 year ago

37 0

 3 year year

Product details

Use of Tips

The ultrasonic Tip is for use in dentistry with Rolence® ELiTEDENT® Ultrasonic Scaler.

Rolence offers different kinds of ultrasonic Tips. The longer and thinner and Tip is, the better becomes its access to periodontal pockets and interproximal areas. Also, and at a constant power setting on the unit, a longer and thinner Tip delivers less clinical power. This means slower concrement removal and less pain for the patient. For gentle treatment, choose a very long and very thin Tip. Only switch to a shorter Tip if a particular treatment situation requires more power than the longer Tip can deliver.

The standard package of ELiTEDENT® PS-30 / (LED) Ultrasonic Scaler includes very few tips. To afford extra tips, please contact Rolence authorized dealer to order.

Before use of the ultrasonic Tip, please read following instruction carefully.

Safety Precautions

Prior to installation and start-up of the Ultrasonic Scaler, carefully read the instructions provided herein!

Precautions for All Systems

1. Do not place the Ultrasonic Scaler on or next to a radiator or other heat source. Excessive heat may damage the Ultrasonic Scaler’s electronics. Place the Ultrasonic Scaler where air is free to circulate on all sides and beneath it. Do not cover vents on rear panel.
2. Always set the system's power adjustment to the lowest power setting for the application of a new or special Tip.
3. The Ultrasonic Scaler is portable, but must be handled with care when moving.
4. Equipment and dental water supply system maintenance are strongly recommended.
5. Close the water shut-off valve in the dental water supply system every night before leaving the office.
6. The use of an in-line water filter is recommended.
7. Used for the intended purpose only. The Ultrasonic Scaler must be used by other than qualified and trained personnel, in medical facilities.
8. Grounding reliability can only be achieved when the equipment is connected to an equivalent receptacle marked Hospital Only or Hospital Grade.

Precautions for Ultrasonic Prophylaxis Procedures

1. Before first use, clean, disinfect and sterilize new or repaired handpieces and Tips you wish to use with the Ultrasonic Scaler.
2. Always examine the Ultrasonic Scaler and ultrasonic tips before commencing treatment. A damaged Ultrasonic Scaler or damaged tip must not be used.
3. Ultrasonic tips that have been bent, damaged, or reshaped are susceptible to in-use breakage and should be discarded and replaced immediately.
4. Retract the lips, cheeks and tongue to prevent contact with the ultrasonic tip whenever it is placed in the patient's mouth.

Introduction
Rolence Enterprise Inc. is an ISO 9001(2008), ISO 13485(2003) certified manufacturer of Ultrasonic Scalers. All the products are FDA registered and compliant with EN standards (CE Marking).

Conformance to Standards:

The Rolence® ELiTEDENT® PS-30 / (LED) Ultrasonic Scaler conforms to IEC60601-1-2:2007 and IEC60601-1-1:2006.
The device is CE marked corresponding to European Medical Device Directive (93/42/EEC)

Installation of PS Sterilizable Handpiece and Tips
This Ultrasonic Scaler is designed working with EMS® or Satelec (S) tips. Please check prints on handpiece to identify which tip spec. is required. Incorrect tip connection can cause handpiece thread damaged. Please note you can NOT connect a PS Sterilizable handpiece with LED to a Non-LED Scaler and vice versa. Use Torque Wrench to mount and drive ultrasonic tips to the appropriate PS Sterilizable handpiece gently.

#Ultrasonic Scaler #Ultrasonic Scalers #Scaling Tip #Accessories

You May Also Like

Contact Now

If you are interested in the product, contact 2bvideo.com for more information for more information

To:: Rolence Enterprise Inc.

Message:

Submit

Disclaimer：

The information of 2bvideo.com limited shown above is provided by the user or collected on the network. Video 2B does not guarantee the authenticity,accuracy and legitimacy of 2bvideo.com limited information. Video 2B does not involve legal relationships and disputes between users arising from transactions other than secured transactions on this website. Disputes shall be settled by you through negotiation. If you are the person in charge or relevant employee of this enterprise, if you find that the enterprise information is incorrect or want to manage thiscompany, please contact us jacklee1558@gmail.com, after you claim the enterprise, you can obtain management permission, publish supplyand demand information, bring consulting orders, and remove page advertisements.

Rolence Enterprise Inc.

 Audited supplier

3 year

Address: Chungli, China Taiwan

Main Product: Portable X-Ray, Curing Light, Ultrasonic Scaler, Curing Box , Dental Digital Sensor, UV Spot Curing

 Contact now