Product
Product
Supplier
Search
Get Quote
730 people are quoting
Steel strip rewinding machine for flux cored wire drawing machine
FD1600+GZL00+SD800 Strip rewinding machine
Product model, composition and name
1. Product name: FD1600 pay off machine +GZL00 dancer+SD800 Spool take up machine
2. Product composition: FD1200 vertical passive pay-off machine + GZL00 Support rack + SD800 Spool take up machine
II.Application scope for flux cored strip winding machine(including pay off machine+dancer machine+take up machine)
This set is mainly used for the rewinding of steel belts.
III.Main technical parameters for FCW welding production machine
1. Steel belt width (mm): 14
2. Pay-off motor power: Passive type (un-powered type)
3. Take up machine motor power: 11KW
4. Winding displacement form: Ball screw winding displacement
5. Tension control: Sensor-controlled tension arm
6. Take-up speed (m/min): 4m/s
7. Take-up(take up machine) spool diameter (mm): ￠800
8. Air supply: 0.5-0.6Mpa, clean and dry air source for oil mist removal
9. Braking time: Normal braking≤60S
Quick braking≤10S
Emergency braking≤3S
IV.Main working principle of flux cored winding machine:FD1600 vertical passive pay-off machine machine: Place the steel belt cut and coiled in the last process on the vertical passive pay-off machine by driving or a special sling. At this moment, the expansion sleeve is in an expansion & tension state. Put the steel belt in the expansion sleeve. Then use a special spanner to loosen the expansion sleeve to cause the expansion sleeve to tightly enclose the steel belt. GZL00 Support rack: Pull out the steel belt from the vertical passive pay-off machine, and allow it to enter the second group of horizontal guide rollers by way of the first group of horizontal guide rollers.
SD800 Spool take up machine: The steel belt from the roller support is pulled through the well-shaped guide roller and wire-pressing guide roller, and then it is wrapped around the spool. At this moment, start the device, gradually from a low speed to a normal working state. Use the tension arm to control the pay-off speed.
We can make the flux cored wire drawing machine,drum packing machine and layer winding machine.
If you are interested in the product, contact 2bvideo.com for more information for more information
The information of 2bvideo.com limited shown above is provided by the user or collected on the network. Video 2B does not guarantee the authenticity,accuracy and legitimacy of 2bvideo.com limited information. Video 2B does not involve legal relationships and disputes between users arising from transactions other than secured transactions on this website. Disputes shall be settled by you through negotiation. If you are the person in charge or relevant employee of this enterprise, if you find that the enterprise information is incorrect or want to manage thiscompany, please contact us jacklee1558@gmail.com, after you claim the enterprise, you can obtain management permission, publish supplyand demand information, bring consulting orders, and remove page advertisements.
Main Product:
Wire Drawing Machine ,
Flux Cored Wire Forming Machine ,
Layer Winding Machine ,
Mig Welding Wire Production Machine ,
pay off and take up machinery,
drum packing machine
