Product
Product
Supplier
Search
Get Quote
730 people are quoting
Duratron® T4203 PAI Polyamide-imide AE (Aerospace) offers the most superior impact strength of all Duratron® T PAI grades, while also possessing the highest elongation of all Duratron® grades. Due to its intrinsic high temperature resistance, dimensional stability, and exceptional machinability, Duratron® T4203 PAI AE is often used for precision parts in high-tech equipment. Its ability to carry high loads over a broad temperature range also makes it ideal for structural components such as linkages and seal rings, and an excellent choice for aerospace wear applications involving impact loading and abrasive wear.
Material Properties
Superior impact strength
Highest elongation of all Duratron® grades
Dimensional stability
Exceptional machinability
High temperature resistance
Available Geometries
Duratron® T4203 PAI AE stock shapes encompass a range of standard sizes in the following geometries: Rod, Plate
Available Colors
Duratron® T4203 PAI AE stock shapes come in the following colors: Yellow-Green
Key Properties
Thermal Performance to 500°F (260°C) Continuous Use Temp
Creep Resistant
Excellent Wear Properties
High Outstanding Electrical Properties
Highest Impact Strength of all PAI Grades
Low Outgassing Material
Total Mass Loss (TML%) 1.85%
Collected Volatile Condensable Materials (CVCM%) 0.00%
Water Vapor Regained (WVR%) 0.49%
Limitations
Duratron® T PAI Grade Materials have a relatively high moisture absorption rate, parts used in high temperature service or made to tight tolerances should be kept dry prior to installation.
Thermal shock resulting in deformation can occur if moisture laden parts are rapidly exposed to temperatures above 400°F (205° C).
Chemical Resistance to Strong Bases, Steam and Some High Temperature Acids
Applications
Bushings & Bearings
Cams
Connectors
High Temp High Strength Electrical Housings
Oil & Gas Down Hole Components
Semiconductor Test Sockets
Thrust Washers
Wear Rings
Typical Properties of Duratron ® T 4203 PAI Extruded
DETAIL
Description
Value
Material Type
Imidized Amorphous Thermoplastic
Chemical Name
PAI Polyamide-imide
Trade Name
Duratron® T4203 PAI
Additives
Unfilled Electrical Grade
Color
Dark Yellow
Manufacturer
Mitsubishi Chemical Advanced Materials
PHYSICAL
Property
Test
Unit of Measure
Value
Density
ASTM D792
g/cm³
1.41
ASTM D792
lb/in³
0.051
Water Absorption, 24 hrs, Immersion
ASTM D570
% by wt.
0.4
Water Absorption, Saturation, Immersion
ASTM D570
% by wt.
1.7
MECHANICAL
Property
Test
Unit of Measure
Value
Tensile Strength
ASTM D638
psi
20000
Tensile Modulus
ASTM D638
psi
600000
Tensile Elongation at Break
ASTM D638
%
10
Flexural Strength
ASTM D790
psi
24000
Flexural Modulus
ASTM D790
psi
600000
Compressive Strength
ASTM D695
psi
24000
Compressive Modulus
ASTM D695
psi
478000
Hardness
ASTM D785
NA
Rockwell E80 (M120)
IZOD Impact-Notched
ASTM D256
ft-lb/in
2
Dynamic Coefficient of Friction
QTM 55007 (Dry vs Steel)
NA
0.35
THERMAL
Property
Test
Unit of Measure
Value
Coefficient of Linear Thermal Expansion
ASTM D696
x 10-5 in./in./℉
1.7
Heat Deflection Temp
ASTM D648
℃ at 264 psi
278
ASTM D648
℉ at 264 psi
532
Max Continuous Operating Temp
℃ at 264 psi
260
℉
500
Minimum Operating Temp
℃ at 264 psi
-200
℉
-328
Thermal Conductivity
ASTM C117
BTU-in/ft²-hr-℉
1.8
Flammability Rating
UL94
NA
V-0
ELECTRICAL
Property
Test
Unit of Measure
Value
Dielectric Strength
ASTM D149
V/mil
580
Dielectric Constant at 1 MHz
ASTM D150
NA
4.2
Dissipation Factor at 1 MHz
ASTM D150
NA
0.026
Surface Resistivity
ASTM D257
ohm/square
>10^13
COMPLIANCE
Description
Value
FDA
No
USDA
No
NSF
No
3-A Dairy
No
Canadian Food Inspection Agency
No
USP Class VI
No
OTHER
Description
Value
UV Resistant
No
If you are interested in the product, contact 2bvideo.com for more information for more information
The information of 2bvideo.com limited shown above is provided by the user or collected on the network. Video 2B does not guarantee the authenticity,accuracy and legitimacy of 2bvideo.com limited information. Video 2B does not involve legal relationships and disputes between users arising from transactions other than secured transactions on this website. Disputes shall be settled by you through negotiation. If you are the person in charge or relevant employee of this enterprise, if you find that the enterprise information is incorrect or want to manage thiscompany, please contact us jacklee1558@gmail.com, after you claim the enterprise, you can obtain management permission, publish supplyand demand information, bring consulting orders, and remove page advertisements.
Main Product:
Plastics Sheet,
Plastics Rod,
CNC Plastic Machined Parts,
CNC Metal Machined Parts,
Plastics Injection Molding ,
Antistatic Material
