Product
Product
Supplier
Search
Get Quote
730 people are quoting
2016 SMD LED with 700nm wavelength LED Emitter;
700nm wavelength can be packaged in different LED frame. SMD LED or through-hole LED Lamps type. In this 2016FIRC-70L14I100, we produce it in size of 2.0x1.6mm LED frame. Which is similar with 2835 SMD LED but smaller than that. Since 700nm LED is available in the LED market, people use this 700nm LED emitter in kinds of medical applications or IR control system, such as iris recognition, the blood analyzer or vein authentication ect. If you need some 700nm IR LED for your project with small size SMD LED, this one will work perfectly for it. Just contact us for more detail aabout it.
Electrical Parameters:
|
Parameter |
Symbol |
Rating |
Unit |
|
Power Dissipation |
Pd |
200 |
mw |
|
Pulse Forward Current |
IFP |
200 |
mA |
|
Forward voltage |
IF |
≤100 |
mA |
|
Reverse Voltage |
VR |
5 |
V |
|
Junction Temperature |
Tj |
100 |
℃ |
|
Operating Temperature |
Topr |
-40 - +80 |
℃ |
|
Storage Temperature |
Tstg |
-40 - +100 |
℃ |
|
Soldering Temperature |
Tsol |
230 |
℃ |
|
Electro-Stati-Discharge(HBM) |
ESD |
2000 |
V |
|
Service lige under normal conditions |
Time |
60000 |
H |
|
Warranty |
Time |
2 |
Years |
|
Antistatic bag |
Piece |
4000 |
Bag |
*Pulse forward current confition: Duty 1% and Pulse width=10us.
*Soldering confition: Soldering confition must be completed with 3 secongds at 260℃
|
Parameter |
Symbol |
Min |
Type |
Max |
Unit |
Test Condition |
|
Forward Voltage |
VF |
1.6 1.8 2.0 |
1.8 2.0 2.2 |
2.0 2.2 2.4 |
V |
IF=20mA IF=50mA IF=100mA
|
|
Radiated Power |
PO |
4 4 20 |
|
8 20 30 |
mW |
IF=20mA IF=50mA IF=100mA |
|
Peak Wavelength |
λp |
700 710 |
nm |
IF=20mA |
||
|
Half Width |
λ△ |
|
21 |
|
nm |
IF=20mA |
|
Viewing Half Angle |
θ1/2 |
|
±63 |
|
deg |
IF=20mA |
|
Reverse Current |
IR |
|
|
5 |
uA |
VR=5V |
*Luminous intensity is measured by ZWL600.
*λD is derived from the CIE chromaticity diagram and represents the single wavelength which defines the color of the device.
Size of 2016 LED SMT:
Product Details:
99.99% purity gold wire;
Silver plated LED frame;
Famous branded chips;
High quality epoxy;
Production progress:
HANDLING PRECAUTIONS:
Compare to epoxy encapsulant that is hard and brittle, silicone is softer and flexible Althouth its characteristiec significantly reduces thermal stress, it is more susceptible to damage by extemal mechanical force. As a result, special handling precautions need to be observed during assembly using silicone encapsulated Led products. Failure to comply might lead to damage and premature failure of the led
1. Handle the component along the side surfaces by using forceps or appropriate tools.
2, Do not directly touch or handle the silicone lens surface. It may damage the internal circuitry.
3, Do not stack together assembled PCBS containing exposed LEDs. Impact may scratch the silicone lens or damage the internal circuitry.
4, 4-A The inner diameter of the SMD pickup nozzle should not exceed the size of the LED to prevent air leaks;
4-B A plible material is suggested for the nozzle tip to avoid acratching or damaging the LED surface during pickup.
4-C The dimension of the component must be accurately programmed in the pick-and-place machine to insure precise pickup and avoid damage during production;
4-D As silicone encapsulation is permeable to gases, some corrosive substances such as H2S might corrode silver plationg of leadframe. Special care should be taken if an LED with silicone encapsulation is to used near such substances.
5, Please aviod continued exposure to the condensing moisture environment and keep the product away from repid transitions in ambiemt temperature.
6, Product in the original sealed package is recommended to be assembled within 24 hours of opening.
If you are interested in the product, contact 2bvideo.com for more information for more information
The information of 2bvideo.com limited shown above is provided by the user or collected on the network. Video 2B does not guarantee the authenticity,accuracy and legitimacy of 2bvideo.com limited information. Video 2B does not involve legal relationships and disputes between users arising from transactions other than secured transactions on this website. Disputes shall be settled by you through negotiation. If you are the person in charge or relevant employee of this enterprise, if you find that the enterprise information is incorrect or want to manage thiscompany, please contact us jacklee1558@gmail.com, after you claim the enterprise, you can obtain management permission, publish supplyand demand information, bring consulting orders, and remove page advertisements.
Main Product:
SMD LED ,
IR LED ,
Through-hole LED,
RGB LED ,
Flashing LED,
High-power LED
