KC-M500PL Laser machine

6 month ago

1 0

KC Printing Machine (Group) Limited

 9 year year

Product details

Machine features of laser engraving machine

- Integrated overall structure, equipped with automatic focusing system, humanized operation process.
- Imported isolators are used to protect the fiber laser window, enhance stability and laser life.
- The beam quality is significantly improved compared with traditional solid lasers, with fundamental mode (TEM00) output and a focused spot diameter of less than 20um. The divergence angle is 1/4 of that of semiconductor pumped lasers. It is particularly suitable for fine and precise etching.
- The electro-optical conversion efficiency is high, and the power consumption of the whole machine is less than 800W, which is 1/10 of that of lamp-pumped solid laser marking machines, greatly saving energy consumption.
- No special maintenance is required, the service life is long, the size is small, and it is suitable for working in harsh environments.
- Simple and easy to learn, after programming, the equipment automatically completes the etching process of the pattern.
- The whole machine performs laser processing in a closed environment to improve the factory's safety production level.

Working environment requirements for pad plate laser engraving machine

- - The ambient temperature is required to be between 15~40℃.
  - The humidity requirement is 40%-80%. To ensure no condensation, it is recommended to install a dehumidifier.
    - Power grid requirements: 220V; 50Hz.
  - Power grid fluctuation: ±5%, the grid ground line meets international requirements. In areas where the voltage amplitude is more than 5%, electronic automatic voltage and current stabilization devices should be installed.
  - There should be no strong electromagnetic signal interference near the installation equipment. Avoid radio transmitters (or relay stations) around the installation site.
  - Foundation amplitude: less than 50um; Vibration acceleration: less than 0.05g. Avoid a large number of stamping and other machine tools nearby.
  - Equipment space requirements must be smoke-free and dust-free, and avoid working environments with severe dust such as metal polishing and grinding.
  - Air pressure: 86-106kpa.
  - Anti-static floors should be installed in some environments to strengthen shielding, etc.

Technical parameters
Performance	parameters	Total wattage	0.8KW
			F=160mm Range：100mm×100mm
		Scan speed	Line scan≤10000mm/s
		MIn line width	0.015mm
		Single scan depth	≤0.003mm
		Repeatability	±0.01mm
		Min Character	0.3mm
	Laser head	Wattage	20W
		Single pulse energy	<0.1mJ
		Beam quality M²	<1.3
		Wavelength	1064nm
Soft-system	The control software KC-soft supports Windows platform, is easy to operate, powerful, and compatible with PLT, BMP and other file formats output by AutoCAD, Coreldraw, Photoshop and other software. It can mark patterns, barcodes, Chinese and English characters, product serial numbers (automatic number jump), and can directly use SHX and TTF fonts in the software. It can also adjust the size, spacing and arrangement of characters very conveniently.

Standards Certificate︰ CE

Application︰ Pad printing steel plates are gravure plates, and the graphic part of them is lower than the surface of the plate base. They are usually made by liquid etching, which is a relatively complicated process and causes certain

damage to the environment. The method of laser etching has been explored by the industry. The breakthrough development of laser technology has laid the foundation for the direct etching of pad printing steel plates. The laser etching machine uses the top domestic high-power laser and high-quality galvanometer scanning system, which can achieve rapid etching of thick steel plates and thin steel sheets above 0.3mm. It is the best choice to replace the traditional etching method for making steel plates.

Details of steel plate laser engraving machine

Pad printing steel plate used for pad printer laser engraving machine is a device used for high-precision pattern and text engraving on pad printing steel plate. It uses a high-energy density laser beam to irradiate the surface of the pad printing steel plate, so that the steel plate material melts or vaporizes instantly to form a preset pattern, text or line. The path and energy of the laser beam are controlled by a computer to accurately realize the engraving of various complex graphics.

Structural composition

• Laser generation system: Generates high-energy laser beams, such as common fiber lasers, CO₂ lasers, etc., to provide energy sources for engraving.

• Control system: Through special control software, input and edit information such as engraving patterns and texts, and accurately control the movement trajectory, energy size, pulse frequency and other parameters of the laser beam.

• Mechanical transmission system: It is composed of high-precision guide rails, lead screws, motors, etc. to ensure that the laser head can move accurately and smoothly to achieve high-precision engraving.

• Cooling system: Used to cool key components such as laser generators to ensure that the equipment maintains stable performance during long-term operation.

• Workbench: used to place pad printing steel plates, usually with adjustable functions, can adapt to steel plates of different sizes and shapes.

It is mainly used in the pad printing industry to make steel plates for pad printing processes of various products. For example, the pad printing steel plates required for printing patterns, logos, texts, etc. on the surface of electronic products, toys, cosmetics, auto parts and other products can all be made by pad printing steel plate laser engraving machines.