0.5W 550-555nm Yellow-Green LED 2835 SMD LED

9 month ago

20 0

Shenzhen Best LED Opto-electronic Co.,Ltd / BESTSMD CO LIMITED(HK)

 8 year year

Product details

What is green LED wavelength?

550nm - 560nm LED are still in the range of green wavelength. Compare with 510nm LED or 525nm LED, this 550nm LED will be much more yellow-ish. In this case, most of people also name this green SMD LED or green through-hole LED as yellow-green LED. We package this yellow-green LED in 3014 SMD LED case, the part number is 3015LGC55D7L12. In this LED frame, people can welding it as top emitting LED or side emitting LED. It's all depends of theire circuit design because there have two kinds of soldering pad in side and bottom of this SMD LED. Which make sure this yellow-green SMD LED easy to use.

3015LGC55D7L12 560nm 550nm LED Emitters Yellow-green Side Emitting LED 3014 SMD LED

Side Emitting LED 3014 Standard LED Size:

Size of 3015LGC55D7L12 560nm 550nm LED Emitters Yellow-green Side Emitting LED Green SMD LED 3014

Electrical Parameters:

Parameter	Symbol	Rating	Unit
Reverse Voltage	VR	5	V
Junction Temperature	Tj	100	℃
Operating Temperature	Topr	-40 - +80	℃
Storage Temperature	Tstg	-40 - +100	℃
Soldering Temperature	Tsol	245	℃
Electro-Stati-Discharge(HBM)	ESD	1000	V
Service lige under normal conditions	Time	60000	H
Warranty	Time	2	Years
Antistatic bag	Piece	4000	Bag

*Pulse forward current confition: Duty 1% and Pulse width=10us.

*Soldering confition: Soldering confition must be completed with 3 secongds at 260℃

Parameter	Symbol	Rating	Unit
Forward Current	IF	20	mA
Forward Voltage	V	2.8-3.4V	V
Luminous Intensity	IV	1200-1500	mcd
Wavelength	λP	550-560nm	nm
Packing	Piece	4000	reel
Vewing angle	2θ1/2	120	Deg

*Luminous intensity is measured by ZWL600.

*λD is derived from the CIE chromaticity diagram and represents the single wavelength which defines the color of the device.

Production of SMD LED 3014 Side Emitting LED:

SMD LED prduction process green LED

HANDLING PRECAUTIONS:

Compare to epoxy encapsulant that is hard and brittle, silicone is softer and flexible Althouth its characteristiec significantly reduces thermal stress, it is more susceptible to damage by extemal mechanical force. As a result, special handling precautions need to be observed during assembly using silicone encapsulated Led products. Failure to comply might lead to damage and premature failure of the led

1. Handle the component along the side surfaces by using forceps or appropriate tools.

2, Do not directly touch or handle the silicone lens surface. It may damage the internal circuitry.

3, Do not stack together assembled PCBS containing exposed LEDs. Impact may scratch the silicone lens or damage the internal circuitry.

4, 4-A The inner diameter of the SMD pickup nozzle should not exceed the size of the LED to prevent air leaks;

4-B A plible material is suggested for the nozzle tip to avoid acratching or damaging the LED surface during pickup.

4-C The dimension of the component must be accurately programmed in the pick-and-place machine to insure precise pickup and avoid damage during production;

4-D As silicone encapsulation is permeable to gases, some corrosive substances such as H2S might corrode silver plationg of leadframe. Special care should be taken if an LED with silicone encapsulation is to used near such substances.

5, Please aviod continued exposure to the condensing moisture environment and keep the product away from repid transitions in ambiemt temperature.

6, Product in the original sealed package is recommended to be assembled within 24 hours of opening.

You May Also Like

Contact Now

If you are interested in the product, contact 2bvideo.com for more information for more information

To:: Shenzhen Best LED Opto-electronic Co.,Ltd / BESTSMD CO LIMITED(HK)

Message:

Submit

Disclaimer：

The information of 2bvideo.com limited shown above is provided by the user or collected on the network. Video 2B does not guarantee the authenticity,accuracy and legitimacy of 2bvideo.com limited information. Video 2B does not involve legal relationships and disputes between users arising from transactions other than secured transactions on this website. Disputes shall be settled by you through negotiation. If you are the person in charge or relevant employee of this enterprise, if you find that the enterprise information is incorrect or want to manage thiscompany, please contact us jacklee1558@gmail.com, after you claim the enterprise, you can obtain management permission, publish supplyand demand information, bring consulting orders, and remove page advertisements.

Shenzhen Best LED Opto-electronic Co.,Ltd / BESTSMD CO LIMITED(HK)

 Audited supplier

8 year

Address: Shenzhen, China

Main Product: SMD LED , IR LED , Through-hole LED, RGB LED , Flashing LED, High-power LED

 Contact now