Product
Product
Supplier
Search
Get Quote
730 people are quoting
What wavelength is amber light?
The wavelength range of amber LED is 590-595nm. This color are close to the yellow light so that some of people also name it as yellow LED. 590nm LED are widely use in the traffic light. There have three color in traffic light. People will use the 590nm LED for the yellow/amber color instead of 580nm LED. The green color will be 500-505nm LED and red color will be 620-630nm LED normally. In order to order the exactly color as what you need, it will be better to name the wavelength when you order the SMD LED or Through-hole LED for your project.
Electrical Parameters:
|
Parameter |
Symbol |
Rating |
Unit |
|
Power Dissipation |
Pd |
140 |
mw |
|
Pulse Forward Current |
IFP |
100 |
mA |
|
Forward voltage |
IF |
≤70 |
mA |
|
Reverse Voltage |
VR |
5 |
V |
|
Junction Temperature |
Tj |
100 |
℃ |
|
Operating Temperature |
Topr |
-40 - +80 |
℃ |
|
Storage Temperature |
Tstg |
-40 - +100 |
℃ |
|
Soldering Temperature |
Tsol |
245 |
℃ |
|
Electro-Stati-Discharge(HBM) |
ESD |
2000 |
V |
|
Service lige under normal conditions |
Time |
60000 |
H |
|
Warranty |
Time |
2 |
Years |
|
Antistatic bag |
Piece |
4000 |
Bag |
*Pulse forward current confition: Duty 1% and Pulse width=10us.
*Soldering confition: Soldering confition must be completed with 3 secongds at 260℃
|
Parameter |
Symbol |
Min |
Type |
Max |
Unit |
Test Condition |
|
Forward Voltage |
VF |
1.8 |
2.0 |
2.4 |
V |
IF=20mA |
|
Radiated Power |
PO |
3000 |
|
2000 |
mcd |
IF=60mA |
|
Dominant Wavelength |
λp |
590 595 |
nm |
IF=20mA |
||
|
Half Width |
λ△ |
|
25 |
|
nm |
IF=20mA |
|
Viewing Half Angle |
θ1/2 |
|
120 |
|
deg |
IF=20mA |
|
Reverse Current |
IR |
5 |
uA |
VR=5V |
||
*Luminous intensity is measured by ZWL600.
*λD is derived from the CIE chromaticity diagram and represents the single wavelength which defines the color of the device.
Size of 2016 SMD LED:
Product Details:
99.99% purity gold wire;
Silver plated LED frame;
Famous branded chips;
High quality epoxy;
Production progress:
HANDLING PRECAUTIONS:
Compare to epoxy encapsulant that is hard and brittle, silicone is softer and flexible Althouth its characteristiec significantly reduces thermal stress, it is more susceptible to damage by extemal mechanical force. As a result, special handling precautions need to be observed during assembly using silicone encapsulated Led products. Failure to comply might lead to damage and premature failure of the led
1. Handle the component along the side surfaces by using forceps or appropriate tools.
2, Do not directly touch or handle the silicone lens surface. It may damage the internal circuitry.
3, Do not stack together assembled PCBS containing exposed LEDs. Impact may scratch the silicone lens or damage the internal circuitry.
4, 4-A The inner diameter of the SMD pickup nozzle should not exceed the size of the LED to prevent air leaks;
4-B A plible material is suggested for the nozzle tip to avoid acratching or damaging the LED surface during pickup.
4-C The dimension of the component must be accurately programmed in the pick-and-place machine to insure precise pickup and avoid damage during production;
4-D As silicone encapsulation is permeable to gases, some corrosive substances such as H2S might corrode silver plationg of leadframe. Special care should be taken if an LED with silicone encapsulation is to used near such substances.
5, Please aviod continued exposure to the condensing moisture environment and keep the product away from repid transitions in ambiemt temperature.
6, Product in the original sealed package is recommended to be assembled within 24 hours of opening.
If you are interested in the product, contact 2bvideo.com for more information for more information
The information of 2bvideo.com limited shown above is provided by the user or collected on the network. Video 2B does not guarantee the authenticity,accuracy and legitimacy of 2bvideo.com limited information. Video 2B does not involve legal relationships and disputes between users arising from transactions other than secured transactions on this website. Disputes shall be settled by you through negotiation. If you are the person in charge or relevant employee of this enterprise, if you find that the enterprise information is incorrect or want to manage thiscompany, please contact us jacklee1558@gmail.com, after you claim the enterprise, you can obtain management permission, publish supplyand demand information, bring consulting orders, and remove page advertisements.
Main Product:
SMD LED ,
IR LED ,
Through-hole LED,
RGB LED ,
Flashing LED,
High-power LED
