
The compressed air produced by the compressed air compressor carries a large amount of water, oil and other impurities. If water vapor enters the compressed air line, the condensed vapor can cause oxidation, corrosion and damage to the production line equipment.
The point of maximum water vapor density in each gas depends on its temperature and pressure. When the density of water reaches a certain temperature and working pressure, the temperature is the dew point. That is, if the air cools below the dew point, water vapor in the air can appear in the form of water droplets, causing problems on the production line.
YUKA'S desiccant for air dryer Feature& Advantage
*Designed and constructed according to international standards
*Moisture absorption capacity up to 99.99%
*Use Molecular Desiccant in Order
*High absorption rate of desiccant, impermeable to water
*Inlet and outlet valves with minimal pressure drop
*Capable of operating in temperate and humid climates
*Optimum dew point due to use of dry air with minimal pressure
*Resistant to temperature differences in different weather conditions
*Drain valve operates continuously under humidity, temperature and pressure
*Change the size and size of the inlet and outlet air ducts according to customer needs
*The operation is automatic and requires no special foundation.
*The inside of the tower is epoxy paint and the outside is industrial paint.
*Use the lowest power consumption to operate controllers and solenoids that do not exceed a few watts.
*Eliminate the need for regular replacement parts, reducing service and maintenance costs.
*The device can be installed just by connecting the cables and the intake and exhaust pipes.
desiccant air dryer for compressor Product Specification
Pressure dew point under rated conditions: -20 ° C ~ -40 ° C (molecular sieve up to: -70 ° C)
Intake oil content: 0.08ppm (0.1mg/m³)
Dust particle size of finished product: ≤ 60μm
Average re-flow rate: 15% treatment gas volume
Adsorption type: activated alumina (higher molecular sieve available)
Pressure drop: ≤ 0.021Mpa
Regeneration method: normal temperature regeneration
Working mode: two towers 4min or 10min automatic switching, continuous work
Control mode: cycle period 4~10min adjustable
Product Data Sheet
Model | Flow rate (m³/min) | Connection | Input Power (KW) | Power | N.W. (KG) | Dimension (MM) |
HL-1WX | 1.2 | RC1" | 0.2 | 220V 50HZ | 105 | 670x360x1265 |
HL-2WX | 2.4 | RC1" | 0.2 | 220V 50HZ | 135 | 780x360x1485 |
HL-3WX | 3.2 | RC1" | 0.2 | 220V 50HZ | 187 | 850x400x1385 |
HL-6WX | 6.5 | RC1-1/2" | 0.2 | 220V 50HZ | 238 | 1000x450x1700 |
HL-8WX | 8.5 | RC2" | 0.2 | 220V 50HZ | 292 | 1100x500x2050 |
HL-10WX | 11.5 | RC2" | 0.2 | 220V 50HZ | 466 | 1200x500x2030 |
HL-13WX | 13.5 | RC2" | 0.2 | 220V 50HZ | 520 | 1300x500x2230 |
HL-15WX | 17 | DN65 | 0.2 | 220V 50HZ | 670 | 1300x560x2360 |
HL-20WX | 23 | DN80 | 0.2 | 220V 50HZ | 798 | 1400x560x2530 |
HL-25WX | 27 | DN80 | 0.2 | 220V 50HZ | 980 | 1650x600x2570 |
HL-30WX | 34 | DN80 | 0.2 | 220V 50HZ | 1278 | 1750x750x2630 |
HL-40WX | 45 | DN100 | 0.2 | 220V 50HZ | 1624 | 1850x750x2650 |
HL-50WX | 55 | DN100 | 0.2 | 220V 50HZ | 1624 | 1950x850x2650 |
HL-60WX | 65 | DN100 | 0.2 | 220V 50HZ | 2650 | 2200x900x2650 |
HL-80WX | 85 | DN125 | 0.2 | 220V 50HZ | 3520 | 2400x1000x2700 |
HL-100WX | 110 | DN150 | 0.2 | 220V 50HZ | 4320 | 2500x1100x2750 |
HL-120WX | 130 | DN150 | 0.2 | 220V 50HZ | 4750 | 2650x1200x2800 |
HL-150WX | 155 | DN200 | 0.2 | 220V 50HZ | 5260 | 2800x1300x2900 |
The desiccant air dryer for compressorWorking Condition
Rated compressed air inlet temperature: 38 ° C, up to 45 ° C
Rated compressed air pressure: 0.7MPa, maximum 1.0MPa
If you are interested in the product, contact 2bvideo.com for more information for more information
The information of 2bvideo.com limited shown above is provided by the user or collected on the network. Video 2B does not guarantee the authenticity,accuracy and legitimacy of 2bvideo.com limited information. Video 2B does not involve legal relationships and disputes between users arising from transactions other than secured transactions on this website. Disputes shall be settled by you through negotiation. If you are the person in charge or relevant employee of this enterprise, if you find that the enterprise information is incorrect or want to manage thiscompany, please contact us jacklee1558@gmail.com, after you claim the enterprise, you can obtain management permission, publish supplyand demand information, bring consulting orders, and remove page advertisements.
Main Product:
Compressed Air Dryer ,
Compressed Air Filter,
Water Gas Separator,
Condensate Auto Drain,
Air Filter Element,
Differential Pressure Gauge